Porsche 911 992 Carrera

A project that I'm working on for the past year, but because of some forum issues overhere, have not posted earlier.
So let's start with a short trip down memory lane...

On instagram I've met this designer Denilson, who has created the awsone 3D design of the Porsche 911 992 Carrera.
You can find his designs on Cults3D:
https://cults3d.com/en/users/3dvm/3d-models
Or Instagram:
https://www.instagram.com/denilsonvm_modelcars/

Back to the model. This is not your regular kit, but one you need to print before assembly.
https://modelbrouwers.nl/media/cache/34/1c/341c13764d93efa2a27e8909ad295aa1.jpg
https://modelbrouwers.nl/media/cache/23/18/2318d4a38c52b721448d19dad2a8b747.jpg
https://modelbrouwers.nl/media/cache/8a/f7/8af74f8d36bdd915984c272c12f6ab9c.jpg
https://modelbrouwers.nl/media/cache/e1/48/e14844431e7d583b56a6cf8b8ed6f933.jpg

The kit has loads of details including moulds for vacum forming the windows, instruction sheet for building and a sheet to print your own decals.
https://modelbrouwers.nl/media/cache/2b/06/2b0634d4cc5f8949ebd46892c0f850e1.jpg

This is my aim, in Gentian Blue Metalic.
https://modelbrouwers.nl/media/cache/10/00/1000681f474691cf590c8e0cd76ae716.jpg

The prints took a few days, but the result is very nice.
There are a lot of support attachments to sand. So mask on, air filter on and start sanding...
https://modelbrouwers.nl/media/cache/e8/bc/e8bc641a299814c75ed65665122551ef.jpg
https://modelbrouwers.nl/media/cache/8b/24/8b2477865b79cffe7c63b55e9f95b7b6.jpg
https://modelbrouwers.nl/media/cache/82/2d/822dc276119ee607b21944b2b8d510c6.jpg

After (wet) sanding and scribing, the body starts to look pretty nice.
https://modelbrouwers.nl/media/cache/a8/a6/a8a621caa27f2fe43db02a0cc40fdd95.jpg
https://modelbrouwers.nl/media/cache/8f/27/8f27ea89d780cfef64dad6bc22fa8acf.jpg

A slightly more challenging task was to remove the supports in the window frames
https://modelbrouwers.nl/media/cache/c6/07/c607d15b86c9d49297dbc273ebe7ba26.jpg
https://modelbrouwers.nl/media/cache/bd/e6/bde6e5fc0d38bd9d3eeb2029f8542962.jpg

After spraying some primer, I inspected the body and fixed some imperfections. And it was time to fit the bumpers
https://modelbrouwers.nl/media/cache/2f/a3/2fa38ebaeb2b768d3d1991d921037173.jpg
https://modelbrouwers.nl/media/cache/af/6b/af6bb4bac4bf040a910c9c4c44b57ebc.jpg

https://modelbrouwers.nl/media/cache/75/2c/752c1556a142ff2afc9b97683f469cab.jpg
https://modelbrouwers.nl/media/cache/4b/e0/4be05f55d746996a7429e0040e721d15.jpg
https://modelbrouwers.nl/media/cache/cd/bf/cdbfcb51f5db76de24b8f88fec86869a.jpg
https://modelbrouwers.nl/media/cache/d3/3a/d33a9fa0fe89811080c765b6a1b5100a.jpg

A few pictures of my first attempts to vacform the windows
https://modelbrouwers.nl/media/cache/0a/c1/0ac1a627706b75ae5fabf7dbfd7ddda4.jpg
https://modelbrouwers.nl/media/cache/d1/de/d1de6ddac5324bc9e1b17159ce52aa33.jpg
https://modelbrouwers.nl/media/cache/6a/0c/6a0cf8aa5e67c4240cea91e21168ff3e.jpg

And then it was time for paint:
1e coat
https://modelbrouwers.nl/media/cache/d9/b6/d9b6f68263c99178a96d4fa1ca8a1925.jpg
https://modelbrouwers.nl/media/cache/0d/62/0d621fde8dbf372d092005d435941ff9.jpg

2nd coat
https://modelbrouwers.nl/media/cache/80/a6/80a6f80c23fc1529bd0df49691554f6f.jpg
https://modelbrouwers.nl/media/cache/69/7b/697b484fcb1ad17bae588a1b8ddd396a.jpg

That's a beautiful exterior color.!!

Looking good so far!

The interior is done and ready to be put in the car.
Here is the final WIP picture
https://modelbrouwers.nl/media/cache/03/2b/032b4d01875b082699bd1da6e9996e25.jpg

And yesterday the gloss lacquer was applied
https://modelbrouwers.nl/media/cache/65/5f/655f8373bdb89e8aa8c8b6125095cea7.jpg

I'll this to cure and than polish it smooth.