Alternator issue
buick8791
07-21-2024, 12:35 PM
Hi,
what are your opinions or experiences related to alternator pure energy 7864604N sold by RockAuto?
Thanks in forward!
what are your opinions or experiences related to alternator pure energy 7864604N sold by RockAuto?
Thanks in forward!
HotZ28
07-24-2024, 09:32 PM
Look @ the warranty, is it lifetime, if not find another one that is!
aleekat
07-24-2024, 10:28 PM
Any local rebuilders? Rockauto is ok but when you have to ship back you lose time.
buick8791
07-26-2024, 11:19 AM
Thanks HotZ28 and aleekat!
I made the final test for the charging system. The alternator don`t work. It becomes very hot rapidly and smells odd and not charging. So, the diode bridge is gone. I have the original alternator with the new diode bridge in parts waiting for the putting them together.
I asked if the alternator in question were better than original or reman some unit what is now burned.
I made the final test for the charging system. The alternator don`t work. It becomes very hot rapidly and smells odd and not charging. So, the diode bridge is gone. I have the original alternator with the new diode bridge in parts waiting for the putting them together.
I asked if the alternator in question were better than original or reman some unit what is now burned.
buick8791
08-10-2024, 11:18 AM
Hi,
now is the new alternator in its place. But one question, how important is the short bolt installed, that connects the support rod and alternator "under" the alternator and under the wire harness. I havenīt installed it into earlier alternator.
I see that between the support rod and alt has about 5 millimeters distance and if fasten the bolt I think that it makes some bad tension for the rod and alt.
So do I leave the bolt out?
now is the new alternator in its place. But one question, how important is the short bolt installed, that connects the support rod and alternator "under" the alternator and under the wire harness. I havenīt installed it into earlier alternator.
I see that between the support rod and alt has about 5 millimeters distance and if fasten the bolt I think that it makes some bad tension for the rod and alt.
So do I leave the bolt out?
Automotive Network, Inc., Copyright ©2026
