Our Community is over 1 Million Strong. Join Us.

Stop Feeding Overpriced Junk to Your Dogs!

GET HEALTHY AFFORDABLE DOG FOOD
DEVELOPED BY THE AUTOMOTIVEFORUMS.COM FOUNDER & THE TOP AMERICAN BULLDOG BREEDER IN THE WORLD THROUGH DECADES OF EXPERIENCE. WE KNOW DOGS.
CONSUMED BY HUNDREDS OF GRAND FUTURE AMERICAN BULLDOGS FOR YEARS.
NOW AVAILABLE TO THE GENERAL PUBLIC FOR THE FIRST TIME
PROPER NUTRITION FOR ALL BREEDS & AGES
TRY GRAND FUTURE AIR DRIED BEEF DOG FOOD

P0325 Knock Sensor $700 rip off


RIP
03-09-2020, 06:53 PM
04 Element 2.4 ltr engine. Don't waste the $700 bucks or so a Honda dealer will charge to change the knock sensor. I changed it in about 90 minutes in my driveway using a ratchet, combination of extensions, a universal joint and a 27 mm (1 1/16 inch) socket. I accessed it from below by removing the front engine bay cover. Got my fingers on the connector and removed it. Got the socket and extensions on it then went up top to get a hand on the ratchet and removed the sensor. If the universal joint flops too much wrap electricians tape around it to stiffen in. I then screwed in the new sensor from below and torqued it down from above. There's limited access but it can be done. A dealer will remove the intake manifold to gain access. NOT NEEDED!. After 70 miles of driving the CE light went out and has been out for a month. FIXED with $700 in my pocket and not some rip off dealership's....CHA CHING!!!

Good chance this applies to many Hondas with the 2.4 ltr engine.

Add your comment to this topic!