steering rack replacement costs=--- ???
jamesmetairie
07-30-2019, 11:35 PM
98 lumina.
shop says need it replaced.
waht,s a rough estimate of the cost, labor,etc. involved.
thanks for any help.
shop says need it replaced.
waht,s a rough estimate of the cost, labor,etc. involved.
thanks for any help.
maxwedge
07-31-2019, 08:06 AM
About 3 hrs labor, some fluid, maybe hoses, then a toe in alignment. You can price the rack online. Local labor rates apply.
jamesmetairie
08-04-2019, 05:01 AM
About 3 hrs labor, some fluid, maybe hoses, then a toe in alignment. You can price the rack online. Local labor rates apply.
thanks maxwedge
I,m thinking the local "pull a part" has several lumina,s.
maybe I,ll get a used rack from there. there,s a lot of mechanics pulling parts that may do the work.
the slight fender bender was not so slight after all.
lol
thanks maxwedge
I,m thinking the local "pull a part" has several lumina,s.
maybe I,ll get a used rack from there. there,s a lot of mechanics pulling parts that may do the work.
the slight fender bender was not so slight after all.
lol
jamesmetairie
08-05-2019, 03:27 PM
local shops are charging about $875.total.
my mobile mechanic said he ain,t sure if a cross member has to be removed. In that case he can,t do it because he would need a "rack" to lift the Lumina.
Is there a cross member on the 98 lumina?
Thanks for any help.
my mobile mechanic said he ain,t sure if a cross member has to be removed. In that case he can,t do it because he would need a "rack" to lift the Lumina.
Is there a cross member on the 98 lumina?
Thanks for any help.
maxwedge
08-05-2019, 04:45 PM
No member, just the subframe, this can be done without dropping the subframe, I don't understand the problem here, as the procedure is all over the net, U tube included. I would not risk a used rack!
Automotive Network, Inc., Copyright ©2026
