1/24 Tamiya VW Beetle
wardsmodelbuilder
07-21-2019, 03:03 PM
I finally have a little time from commission work to start a little side project. After searching my stash I decided to go for this Beetle, which should be quick and simple.
https://i.postimg.cc/7hrGsJ33/IMG-20190721-150558.jpg
Its going to be painted with zero paints and cleared in 2k, with a beige interior. Might be a strange combination but its just paints I have lying around and I think the chrome on the body panels will look good against a dark blue. Its going to be a completely box stock build. Not looking for anything complicated.
https://i.postimg.cc/3xxycTvc/IMG-20190721-150635.jpg
I have made a start on the body, sanding the seam lines out and given it a first coat of primer.
https://i.postimg.cc/WbnF83hZ/IMG-20190721-150618.jpg
to be continued.....
Chris
www.wardsmodelbuilder.com
wardsmodelbuilder@outlook.com
https://i.postimg.cc/7hrGsJ33/IMG-20190721-150558.jpg
Its going to be painted with zero paints and cleared in 2k, with a beige interior. Might be a strange combination but its just paints I have lying around and I think the chrome on the body panels will look good against a dark blue. Its going to be a completely box stock build. Not looking for anything complicated.
https://i.postimg.cc/3xxycTvc/IMG-20190721-150635.jpg
I have made a start on the body, sanding the seam lines out and given it a first coat of primer.
https://i.postimg.cc/WbnF83hZ/IMG-20190721-150618.jpg
to be continued.....
Chris
www.wardsmodelbuilder.com
wardsmodelbuilder@outlook.com
wardsmodelbuilder
07-27-2019, 02:35 PM
Here is the progress so far on the little Beetle.
https://i.postimg.cc/Bvxyzf6f/IMG-20190727-155535.jpg
Nothing major wrong with the body out of the box, just a couple of mould lines which were easily removed.
Primed, painted and a little bare metal foil added to the side features and then cleared in 2k.
https://i.postimg.cc/Tw0sRjgk/IMG-20190727-155543.jpg
I will now start to work on the chassis and engine.
Thanks
Chris
http://www.wardsmodelbuilder.com
wardsmodelbuilder@outlook.com
https://i.postimg.cc/Bvxyzf6f/IMG-20190727-155535.jpg
Nothing major wrong with the body out of the box, just a couple of mould lines which were easily removed.
Primed, painted and a little bare metal foil added to the side features and then cleared in 2k.
https://i.postimg.cc/Tw0sRjgk/IMG-20190727-155543.jpg
I will now start to work on the chassis and engine.
Thanks
Chris
http://www.wardsmodelbuilder.com
wardsmodelbuilder@outlook.com
denilsonvm
07-30-2019, 03:55 PM
Beautiful!
Automotive Network, Inc., Copyright ©2025