Project 1-64
Nissanmotorsport
12-13-2018, 05:07 PM
A little while back our daughter and son-in-law had their godmother and I let him play cars with the box. These have ever been mine and our children.
In between, a Hotwheels caught my attention when cleaning up a tuned American van.
I decided to disassemble that thing, throw it in the brake fluid and see if I could make something out of it.
After a few days of brake oil and with an aluminum scourer, all paint was gone.
A little after scouring, some blackberries here and there, he was ready to be degreased and primed.
Wondering how that went with a spray can.
https://www.modelbrouwers.nl/media/cache/0b/92/0b92888f78d806ac6500412eb53be5cb.jpg
https://www.modelbrouwers.nl/media/cache/da/53/da53ebf406c13fec78680fd9f50a2a10.jpg
The spraying was better than first thought, yes
https://www.modelbrouwers.nl/media/cache/cd/d4/cdd4d87e734ef6f6727c1b8ca3d3f878.jpg
https://www.modelbrouwers.nl/media/cache/e0/6c/e06c938eafaff27c2d1624b29075be85.jpg
While the primer was drying, the other parts were examined.
The chassis, let's see what we are going to do with the original wheels. Red rims under an orange body, I do not know.
https://www.modelbrouwers.nl/media/cache/c5/87/c587ea900edf604bce67f0e8cf38dc1c.jpg
The window section is also red, but this was nicely smoothed in the front and the back and provided with a piece of dark window foil.
https://www.modelbrouwers.nl/media/cache/dc/a7/dca764e027bf8fe2c570595b1b577abb.jpg
https://www.modelbrouwers.nl/media/cache/e2/c1/e2c127a799623a8ef727855f95f66fc8.jpg
The interior was given a layer of satin black, also with the spray can.
Here we will paint some details later.
https://www.modelbrouwers.nl/media/cache/c9/bb/c9bb442e87fd971148f71d1a32d95893.jpg
After a day of drying, it was time for a tan.
There it went wrong, after a first layer I discovered a place that was not well covered. So after a few drying times, a second layer was set up.
And that was not good, so the whole trade back in the brake fluid and we started again.
After a layer of primer, there was a layer of color. It had to be good in one go and that was it this time.
https://www.modelbrouwers.nl/media/cache/75/2c/752c2b4d53d3d583fc6fb8709d984f6e.jpg
https://www.modelbrouwers.nl/media/cache/21/52/2152f6c2e2b8bfcf5e28efd7cdd0720c.jpg
To be continued ;)
In between, a Hotwheels caught my attention when cleaning up a tuned American van.
I decided to disassemble that thing, throw it in the brake fluid and see if I could make something out of it.
After a few days of brake oil and with an aluminum scourer, all paint was gone.
A little after scouring, some blackberries here and there, he was ready to be degreased and primed.
Wondering how that went with a spray can.
https://www.modelbrouwers.nl/media/cache/0b/92/0b92888f78d806ac6500412eb53be5cb.jpg
https://www.modelbrouwers.nl/media/cache/da/53/da53ebf406c13fec78680fd9f50a2a10.jpg
The spraying was better than first thought, yes
https://www.modelbrouwers.nl/media/cache/cd/d4/cdd4d87e734ef6f6727c1b8ca3d3f878.jpg
https://www.modelbrouwers.nl/media/cache/e0/6c/e06c938eafaff27c2d1624b29075be85.jpg
While the primer was drying, the other parts were examined.
The chassis, let's see what we are going to do with the original wheels. Red rims under an orange body, I do not know.
https://www.modelbrouwers.nl/media/cache/c5/87/c587ea900edf604bce67f0e8cf38dc1c.jpg
The window section is also red, but this was nicely smoothed in the front and the back and provided with a piece of dark window foil.
https://www.modelbrouwers.nl/media/cache/dc/a7/dca764e027bf8fe2c570595b1b577abb.jpg
https://www.modelbrouwers.nl/media/cache/e2/c1/e2c127a799623a8ef727855f95f66fc8.jpg
The interior was given a layer of satin black, also with the spray can.
Here we will paint some details later.
https://www.modelbrouwers.nl/media/cache/c9/bb/c9bb442e87fd971148f71d1a32d95893.jpg
After a day of drying, it was time for a tan.
There it went wrong, after a first layer I discovered a place that was not well covered. So after a few drying times, a second layer was set up.
And that was not good, so the whole trade back in the brake fluid and we started again.
After a layer of primer, there was a layer of color. It had to be good in one go and that was it this time.
https://www.modelbrouwers.nl/media/cache/75/2c/752c2b4d53d3d583fc6fb8709d984f6e.jpg
https://www.modelbrouwers.nl/media/cache/21/52/2152f6c2e2b8bfcf5e28efd7cdd0720c.jpg
To be continued ;)
Niro750
12-13-2018, 10:45 PM
Cool idea
360spider
12-14-2018, 10:22 AM
Neat.
Nissanmotorsport
12-14-2018, 04:43 PM
In the meantime, I had stumbled across that whole box with matchboxes, Hotwheels and everything else. Searching for something with nice wheels that were usable. Sure enough, the luck was on my side and I could still dismantle one.
On the left the original wheels, on the right the new one.
https://www.modelbrouwers.nl/media/cache/d6/ca/d6cac6940aef9ee2f66a37d6c5ef0c17.jpg
It was now important to get everything in place so that they hit all 4 of the ground.
The front ones were somewhat smaller and had to go deeper into the chassis.
After some fiddling, the front axle also had to be shortened because of too wide, this is the result
https://www.modelbrouwers.nl/media/cache/7a/be/7abe6c38d4a51d06b02cecf6fb2b9750.jpg
Then it's time for a dry-fit
https://www.modelbrouwers.nl/media/cache/90/de/90de43bdf39d6efd003d530de6069657.jpg
https://www.modelbrouwers.nl/media/cache/eb/fe/ebfe3b1feaa089972e2ccf8a69ea8fef.jpg
https://www.modelbrouwers.nl/media/cache/7f/6c/7f6c12a26934d1cb4f70e0a241873965.jpg
Then it is decal time
https://www.modelbrouwers.nl/media/cache/14/e2/14e22259342cfc7fce1e184184085f07.jpg
https://www.modelbrouwers.nl/media/cache/0b/10/0b10f7772e5d10f509f7b1683454a970.jpg
https://www.modelbrouwers.nl/media/cache/62/f1/62f11583901b0c0b3a608f63d2470f75.jpg
https://www.modelbrouwers.nl/media/cache/ee/e4/eee4bf4a202d2daac665cdbf9d416d3b.jpg
To be continued ;)
On the left the original wheels, on the right the new one.
https://www.modelbrouwers.nl/media/cache/d6/ca/d6cac6940aef9ee2f66a37d6c5ef0c17.jpg
It was now important to get everything in place so that they hit all 4 of the ground.
The front ones were somewhat smaller and had to go deeper into the chassis.
After some fiddling, the front axle also had to be shortened because of too wide, this is the result
https://www.modelbrouwers.nl/media/cache/7a/be/7abe6c38d4a51d06b02cecf6fb2b9750.jpg
Then it's time for a dry-fit
https://www.modelbrouwers.nl/media/cache/90/de/90de43bdf39d6efd003d530de6069657.jpg
https://www.modelbrouwers.nl/media/cache/eb/fe/ebfe3b1feaa089972e2ccf8a69ea8fef.jpg
https://www.modelbrouwers.nl/media/cache/7f/6c/7f6c12a26934d1cb4f70e0a241873965.jpg
Then it is decal time
https://www.modelbrouwers.nl/media/cache/14/e2/14e22259342cfc7fce1e184184085f07.jpg
https://www.modelbrouwers.nl/media/cache/0b/10/0b10f7772e5d10f509f7b1683454a970.jpg
https://www.modelbrouwers.nl/media/cache/62/f1/62f11583901b0c0b3a608f63d2470f75.jpg
https://www.modelbrouwers.nl/media/cache/ee/e4/eee4bf4a202d2daac665cdbf9d416d3b.jpg
To be continued ;)
Nissanmotorsport
12-15-2018, 04:59 PM
Exhaust was drilled out and the bottom layer for the rear lights was also fitted. (Molotow Chrome)
https://www.modelbrouwers.nl/media/cache/1c/1f/1c1faa4a69ca2fc6f6e1a18c8a3d45fe.jpg
Meanwhile I started on the inside with the first details, namely the seatbelts
https://www.modelbrouwers.nl/media/cache/e1/cc/e1cc612213291a40c7a45a2574e23e1e.jpg
Chassis was colored a bit and some dry brushed.
https://www.modelbrouwers.nl/media/cache/b7/49/b749d6e528948546439fd0fc59ccba9f.jpg
Rear lights and exhaust got their color
https://www.modelbrouwers.nl/media/cache/3a/44/3a4492dd89cc2aaec0df6b4ef5f03b13.jpg
Base color applied, details get their final color
https://www.modelbrouwers.nl/media/cache/43/e1/43e13336bb244fb4b712139a8953df3e.jpg
And that is how the body looks after 2 layers of varnish
https://www.modelbrouwers.nl/media/cache/d3/2f/d32f0e43e7473142890325b3ba0ad408.jpg
https://www.modelbrouwers.nl/media/cache/4d/5e/4d5e3ac445e9cb61fb6d6be97945bf80.jpg
To be continued ;)
https://www.modelbrouwers.nl/media/cache/1c/1f/1c1faa4a69ca2fc6f6e1a18c8a3d45fe.jpg
Meanwhile I started on the inside with the first details, namely the seatbelts
https://www.modelbrouwers.nl/media/cache/e1/cc/e1cc612213291a40c7a45a2574e23e1e.jpg
Chassis was colored a bit and some dry brushed.
https://www.modelbrouwers.nl/media/cache/b7/49/b749d6e528948546439fd0fc59ccba9f.jpg
Rear lights and exhaust got their color
https://www.modelbrouwers.nl/media/cache/3a/44/3a4492dd89cc2aaec0df6b4ef5f03b13.jpg
Base color applied, details get their final color
https://www.modelbrouwers.nl/media/cache/43/e1/43e13336bb244fb4b712139a8953df3e.jpg
And that is how the body looks after 2 layers of varnish
https://www.modelbrouwers.nl/media/cache/d3/2f/d32f0e43e7473142890325b3ba0ad408.jpg
https://www.modelbrouwers.nl/media/cache/4d/5e/4d5e3ac445e9cb61fb6d6be97945bf80.jpg
To be continued ;)
Nissanmotorsport
12-26-2018, 04:29 PM
Everything has hardened enough, I'm going to finish it ;)
We are going to make some detail.
We will install a "window net" on the driver's side.
https://www.modelbrouwers.nl/media/cache/ee/31/ee31fb1fd7a648e25a6011caeeb4dd46.jpg
https://www.modelbrouwers.nl/media/cache/e0/70/e070a1c0c4f8a83ff4d08abf4eb979c5.jpg²
Then painted the inside satin-black, as well as the radiator grille and headlight units.
https://www.modelbrouwers.nl/media/cache/aa/7d/aa7d5d13745d9f8b494d1b82ef662930.jpg
https://www.modelbrouwers.nl/media/cache/35/39/353973cc7b6f8b485363be1dad0ac407.jpg
After that the fire extinguisher and pressure tank have been painted red, unfortunately we do not see that afterwards :?
https://www.modelbrouwers.nl/media/cache/2e/be/2ebebaa4f162f5aa1871ea2dd4a4c95b.jpg
We are going to make some detail.
We will install a "window net" on the driver's side.
https://www.modelbrouwers.nl/media/cache/ee/31/ee31fb1fd7a648e25a6011caeeb4dd46.jpg
https://www.modelbrouwers.nl/media/cache/e0/70/e070a1c0c4f8a83ff4d08abf4eb979c5.jpg²
Then painted the inside satin-black, as well as the radiator grille and headlight units.
https://www.modelbrouwers.nl/media/cache/aa/7d/aa7d5d13745d9f8b494d1b82ef662930.jpg
https://www.modelbrouwers.nl/media/cache/35/39/353973cc7b6f8b485363be1dad0ac407.jpg
After that the fire extinguisher and pressure tank have been painted red, unfortunately we do not see that afterwards :?
https://www.modelbrouwers.nl/media/cache/2e/be/2ebebaa4f162f5aa1871ea2dd4a4c95b.jpg
Nissanmotorsport
12-26-2018, 04:45 PM
Then everything could be merged.
https://www.modelbrouwers.nl/media/cache/64/e0/64e081fd51bd0d549d362c66f8cbb39e.jpg
Then the lamps in the front were colored with a chrome marker. Also put a dry-brush on the radiator grille.
https://www.modelbrouwers.nl/media/cache/0b/23/0b23f3d183417b1874a632a9f1e33241.jpg
Also around it was some dry-brushed at the bottom, to get a worn look because it is so low.
https://www.modelbrouwers.nl/media/cache/3b/d3/3bd3e2c848fdd35caa829288c365c3db.jpg
https://www.modelbrouwers.nl/media/cache/f2/1c/f21c18e39f6ace270ce15d59822c8ba4.jpg
https://www.modelbrouwers.nl/media/cache/e2/7d/e27d459af0561f830e79626b23864a96.jpg
https://www.modelbrouwers.nl/media/cache/64/e0/64e081fd51bd0d549d362c66f8cbb39e.jpg
Then the lamps in the front were colored with a chrome marker. Also put a dry-brush on the radiator grille.
https://www.modelbrouwers.nl/media/cache/0b/23/0b23f3d183417b1874a632a9f1e33241.jpg
Also around it was some dry-brushed at the bottom, to get a worn look because it is so low.
https://www.modelbrouwers.nl/media/cache/3b/d3/3bd3e2c848fdd35caa829288c365c3db.jpg
https://www.modelbrouwers.nl/media/cache/f2/1c/f21c18e39f6ace270ce15d59822c8ba4.jpg
https://www.modelbrouwers.nl/media/cache/e2/7d/e27d459af0561f830e79626b23864a96.jpg
Nissanmotorsport
12-26-2018, 04:50 PM
And here a teaser in anticipation of some decent final photos ;)
https://www.modelbrouwers.nl/media/cache/e5/05/e505c8863bf11fd15565a540f6a2abcb.jpg
And so I finally made a model this year ;)
https://www.modelbrouwers.nl/media/cache/e5/05/e505c8863bf11fd15565a540f6a2abcb.jpg
And so I finally made a model this year ;)
Automotive Network, Inc., Copyright ©2024