K-Break 14 Majesta

Next on the self healing mat is the K-BREAK 14 MAJESTA by Aoshmia, #001547

https://i.imgur.com/s0FNWF8.jpg

Lets get this rolling.

https://i.imgur.com/LczEDZK.jpg

The body is in ruff shape and needs a lot of work getting rid of the mold lines. The rear bumper needed some putty a lots of sanding to remove a dent in it.

https://i.imgur.com/56gRyUo.jpg

Having attached all the body parts along with the rear spoiler it got a couple coats of primer.

https://i.imgur.com/usz8l4j.jpg

After a light sanding to make it as smooth as possible for the base coat.

https://i.imgur.com/ZYyMCEc.jpg

Base coat for this one is going to be charcoal colour of nail polish. Seemed to work great in the past and it is cheap so figure I'd try it again.

https://i.imgur.com/4Txlfji.jpg

https://i.imgur.com/vMuAfav.jpg

After some clear coat and trying to sand it the orange peal was really bad. I think my clear was a bit too thick and did not want to lay down...

Long time no update but here is a little one.

As seen above the clear coat was not very smooth and sanding it was working very well. I decided to give it another coat but this time i thinned it 1:1 to help it smooth out and that seemed to help and was pretty smooth. Sanding and polishing was pretty strait forward and things were looking pretty good until I had a case of the stupids and walked into my patio door and hooked the rear of the body and broke it :(

https://i.imgur.com/KE9cVYu.jpg

What to do...

Oh no! After all that hard work you have to try to fix it, but I suspect that would mean ruining the paint and starting over again. Mind you, many "authentic" drift cars are held together with cable/zip ties....

Oh no! After all that hard work you have to try to fix it, but I suspect that would mean ruining the paint and starting over again. Mind you, many "authentic" drift cars are held together with cable/zip ties....

Haha, your right I never thought about that. Just need to think of a way to make little 'X' shaped zip ties.

What I did decided to do was just glue it back into place and carry on. I'm still working on my modeling skills so I figure since I already messed this one it would give me an opportunity to try a few new things I've not done before.

This inside:

https://i.imgur.com/ztIxrSf.jpg

For the wheels the they came out of the box a bit dull but a blast of clear coat made them really pop, bat hard to see from the pics.

https://i.imgur.com/PWo3huM.jpg

The under side was painted with the base base coat used on the body and couple different shades of metal colors used for the drive line and exhaust.

https://i.imgur.com/Njyd16C.jpg
https://i.imgur.com/NfsNDP1.jpg

Nice work so far.

Last update.

Glass in and body on. For the windows I created my own masks and painted the back side. Painted the window surrounds with flat black and used some BFM for the chrome parts.

For the front grill I used thinned Tamiya X1 and used a little paint brush and just let capillary action to flow in the low area's and give it that nice looking grill.

Not sure if I like how the head lights turned out. There is a hole in there and nothing to go in there.

On the back side for the tail lights I painted the back side of the lens with clear red and orange, took quite and few coats to get them dark enough to my liking.

Painted the tips of the exhaust flat black to make it look smokey.

https://i.imgur.com/itTbnkm.jpg
https://i.imgur.com/Kahbx7r.jpg

https://i.imgur.com/75SRMIY.jpg

https://i.imgur.com/AP7BQ8S.jpg

Well that's it for this one. Enjoyed putting this one together, getting better at painting and details. Thanks for looking at my building of this car!