2006 DIC - Oil Warning reset doesn't work...

Hey Guys,
My parents have a 2006 La crosse with a DIC panel. Trying to clear the oil warning notification. The instructions say to hit the option button until "Engine Oil Monitor” appears. Well...it never appears. It only switches between English/Metric and Compass calibration. What am I doing wrong?
Thanks guys :)

Try pressing the gauge button first to get to oil life. Then try reset. Assuming you have the uplevel DIC

One of the other methods to try is to turn the key to the on position, without starting, press the gas pedal 3 times in succession within 7 seconds, then turn the key off, then start the car.

Try pressing the gauge button first to get to oil life. Then try reset. Assuming you have the uplevel DIC
What "gauge" button? BTW...the DIC is at the top of the middle panel above the stereo. Thanks

Bump....anybody else? Has anyone ran into this problem before where the DIC does not match the instructions?
Thanks

Is this what you have?
http://arbyte.us/images/LaCrosse/LaCrosse_dic_controls.jpg

Yes....exactly. BTW, I tried the gas peddle trick and that didn't work either.
Thanks for helping.

Third one from left is the gauge button

Third one from left is the gauge button
Yes....OK. Thanks. But what from there? There is no "oil life". The display simply gives me the change oil alarm.....

Yes....OK. Thanks. But what from there? There is no "oil life". The display simply gives me the change oil alarm.....
Did you try the options after pressing the gauge?

When you scroll through to the change oil message hit the 4th arrow button to reset......

Did you try the options after pressing the gauge?
Just want to thank you (and everyone) for your help. This did the trick.

Just want to thank you (and everyone) for your help. This did the trick.

Good deal