Tom's Castrol Supra

Time to use Microsol and Set...
A box that was on my "wanted to build list" for far to long.
Only thing that bothered me, was that once finished, it looks a bit toyish...

So the box:

https://www.modelbrouwers.nl/media/cache/d9/f5/d9f5a6b4fa00c7c22d6bb9bdfbed0e5f.jpg

Putty used for the gap between the hood vent, also removed the molded fasteners on the hood and trunk:

https://www.modelbrouwers.nl/media/cache/79/30/79305843f341a42dcaef99171996edbd.jpg

Wanted some Pe goodies, but apparently they never made a Pe sheet for the Supra.
After searching for a sheet, that i could use most of, i ended up buying the one for the Minolta 88 c-v from Tamiya.
Think of the brake discs, wipers, fasteners, tire template etc, that all could be to good use on the Supra.

https://www.modelbrouwers.nl/media/cache/79/66/79667a59f1acd75b85f6ece10843d8ee.jpg

Kit mesh vs. new mesh:

https://www.modelbrouwers.nl/media/cache/22/34/22348b8931943793d8b1cb870ad56bc0.jpg

Painted the body and other parts white, and added a fine layer of 2K for the decals:

https://www.modelbrouwers.nl/media/cache/c9/de/c9de7e104d582b0475f4c14813fffddd.jpg

https://www.modelbrouwers.nl/media/cache/1a/91/1a919ef5859ccc02f8ac4e96d496d21b.jpg

https://www.modelbrouwers.nl/media/cache/44/7c/447c4cdb3e8de522ccf87b7fe53aefdb.jpg

Decal time:

https://www.modelbrouwers.nl/media/cache/7c/6d/7c6de22edf1985c56d68e3cc117400af.jpg

Happy with how the decals turned out. Just need to touch up some small spots, before clearing them:

https://www.modelbrouwers.nl/media/cache/73/e1/73e1e5207dbc7d056b7166bd53f788cb.jpg

https://www.modelbrouwers.nl/media/cache/86/68/86682063f425f84657493cf0fc6add41.jpg

https://www.modelbrouwers.nl/media/cache/fb/be/fbbe1079228ad36e67176c2939b2f686.jpg

Regards,
Jurgen

Beautiful work!

That´s a great looking body!