Mitsubishi Lancer EVO VI WRC Marlboro Mäkinen Mannisenmäki

Hello all
I would like to present to you a model Mitsubishi LAncer EVO VI WRC from 41 Rallye San Remo 1999 which Tommi Mäkinen - Risto Mannisenmäk win this rally.

I built this model based on Tamiya, decals its MSM Creation, spare wheel its MF-Zone and photoetch is Crazy Modeler and Scale Motorsport

Looks good.

Hello,

Nice nuilds.
I have the same '99 San Remo decals in stock, glad to see the result. How did the decals behave?

As a matter of fact, I just started the 2001 Monte-Carlo version, would you mind post more pictures of your build, and give a feedback about the front bumper? Which transkit did you choose?
I have 4 different ones, and I'm not sure which one to choose, none of them is perfect!

Thanks!

Hello

Decals 99 San Remo from MSM Creation in my case was a terribly poor quality and while applying burst - somehow I managed to put them, but if I had the opportunity to do it again I would have bought another manufacturer decals

Unfortunately I have no pictures from the construction of version 2001 - interior and chassis model is built very similar to the version 1999 - when it comes to the front bumper that I used transkit of MF-ZONE - decal is Shunko. The installation of the bumper is quite embarrassing because you have to convert the chassis model at the tap near the radiator - it requires multiple trying them but as you can see it can be done.

Flawless job(s) !

I also have these MSM decals. I rarely see positive comments about them :(

I like your work but sincerely so heavy panel lines it's just ugly !! :confused:
your panel lines really are off-scale, it's like if there was a rubber line between panels !! :frown: :frown:
Also rims are not correct for 1999 SR, they used 10 spokes rims on stages (used 5 spokes only for pre-rally testing) according to all my references (I have this one to build too)

Nice rally cars!

I like your work but sincerely so heavy panel lines it's just ugly !! :confused:
your panel lines really are off-scale, it's like if there was a rubber line between panels !! :frown: :frown:I agree with you, but unfortunately, the dividing lines are the Achilles' heel - I try to make them as thin as possible but unfortunately it does not go to me very well.
Also rims are not correct for 1999 SR, they used 10 spokes rims on stages (used 5 spokes only for pre-rally testing) according to all my references (I have this one to build too)Rims are correct - on the last, loop wet rally in use were 5 spoke
https://www.youtube.com/watch?v=AjpbUm02Gn8 37:35 39:10 44:08
https://www.youtube.com/watch?v=AOGgXA4Lt70 4:46
https://www.youtube.com/watch?v=PTimrpmg_yw

Thank you all for your comments

I agree with you, but unfortunately, the dividing lines are the Achilles' heel - I try to make them as thin as possible but unfortunately it does not go to me very well.
Rims are correct - on the last, loop wet rally in use were 5 spoke
https://www.youtube.com/watch?v=AjpbUm02Gn8 37:35 39:10 44:08
https://www.youtube.com/watch?v=AOGgXA4Lt70 4:46
https://www.youtube.com/watch?v=PTimrpmg_yw

Thank you all for your comments

thanks for your answer and links !
indeed they used the 5 spokes rims... of course all of my reference pics are from other stages !! :lol: :eek7: :lol:

for the panel lines did you consider deepen them before painting ?
if they are deep enough it's maybe not needed any more to paint ;)
it's not an easy task of course... especially around Windows...

your models are really nice anyway and only a expert sight from pics would notice it, in real it must be less visible.

I agree with you, but unfortunately, the dividing lines are the Achilles' heel - I try to make them as thin as possible but unfortunately it does not go to me very well.
Rims are correct - on the last, loop wet rally in use were 5 spoke
https://www.youtube.com/watch?v=AjpbUm02Gn8 37:35 39:10 44:08
https://www.youtube.com/watch?v=AOGgXA4Lt70 4:46
https://www.youtube.com/watch?v=PTimrpmg_yw

Thank you all for your comments

Maybe he is right but I think he could have been more tactful.

I think you did a good job over all and I'm sure next time you can fill the panel lines a little to make them narrower.

I like the finish if the decals and paintwork elsewhere. A nice pair of cars over all though :)

thanks for your answer and links !
indeed they used the 5 spokes rims... of course all of my reference pics are from other stages !! :lol: :eek7: :lol:
You're welcome
I have only one photo and in addition the car Loix where the wheel spokes 5 - only in the movies, I found that the car Makinen also rode on the rim

for the panel lines did you consider deepen them before painting ?
if they are deep enough it's maybe not needed any more to paint ;)
it's not an easy task of course... especially around Windows...The lines were deepened before painting, probably too deep and I did it when podgłębiania accidentally also be broadened, so this effect
As I said this is my biggest problem to do it well, but try as I

One of the things I should do it again this photo model, because those that are not reflective of the beautiful red color which I did.

You're welcome
I have only one photo and in addition the car Loix where the wheel spokes 5 - only in the movies, I found that the car Makinen also rode on the rim

The lines were deepened before painting, probably too deep and I did it when podgłębiania accidentally also be broadened, so this effect
As I said this is my biggest problem to do it well, but try as I

One of the things I should do it again this photo model, because those that are not reflective of the beautiful red color which I did.

you could also eventually consider not to use black (which does not forgive anything) but dark red when body is painted in bright red. :thinkerg:

I know panel lines aren't easy to perfectly do. I can't myself :icon16: :cwm27: oopss.... :cwm27: :cwm27: