ABS voltage at hub

Had C0035 which is th left wheel. I replaced hub and now I'm getting C0040 which is the right side front. At the hub connector I'm getting 4.8v. But between the connector and hub assembly I'm getting like .5v. I used my multimeter and I'm getting small resistance between the connector so there is no broken wires. Thoughts?

The wire could be partially worn through, allowing continuity, but a bad signal. You may have disturbed it when fixing the issue on the other side. A multi-meter between the two wires coming out of the wheel bearing should read approx 1k ohms (give or take a few hundred) to eliminate a shorted wheel speed sensor in the hub as a culprit.