Revell 2016 releases

I hope Revell will release Ford GT LM car in 2017 or 18.

I hope Revell will release Ford GT LM car in 2017 or 18.

I was hoping for one too. Would much rather have one than a four door Porsche and a tractor... Will probably proceed with a conversion of the snap kit.

Tom

I was hoping for one too. Would much rather have one than a four door Porsche and a tractor... Will probably proceed with a conversion of the snap kit.

Tom

There's already one out there by Profil 24....

There's already one out there by Profil 24....

Yeah, I know. Big difference in price between plastic kit and a Profil 24 kit.

Tom

2 weeks ago german Revell presented plans for next 4 months. The Porsches should be issued in February 2017.
Here is the link with with detailed info in german language
http://www.ipmsdeutschland.de/FirstLook/Hersteller_News/Revell_News_2017_I.html

Announced in 2016 for release in February 2017. Now due for mid April, but with lots of good surprises !

http://www.dpmv.de/plastikmodellbau/65-bericht-2016-12-28-eidechse-145

Good job Revell. And now to the 3.0RSR and 935's ! :iceslolan

Announced in 2016 for release in February 2017. Now due for mid April, but with lots of good surprises !

http://www.dpmv.de/plastikmodellbau/65-bericht-2016-12-28-eidechse-145

Good job Revell. And now to the 3.0RSR and 935's ! :iceslolan


Good to see these are finally on the way, even better still to see full engine detail and opening front hood
......Detail looks super fine.... but why mould everying into the body shell Revell????? surely it could have been made with the main under-hood components as separate parts?.... it would only need to be 4 or 5 extra components..
Painting will be a challenge.

https://scontent-syd2-1.xx.fbcdn.net/v/t1.0-9/17458138_10208688255985391_2150795980183300801_n.j pg?oh=a6802472a890b9bdc6e5eccd1dbf7fdd&oe=5957C98E

https://scontent-syd2-1.xx.fbcdn.net/v/t1.0-9/17499297_10208688255945390_5910307763754168927_n.j pg?oh=6c2c7758bba3b5ae284a5914ffdee807&oe=595F4817


https://scontent-syd2-1.xx.fbcdn.net/v/t1.0-9/17424661_10208688255865388_3426622203192870749_n.j pg?oh=21093c1989078df532d7fcfd254231ba&oe=596E997C


Regards,
Dan

Good to see these are finally on the way, even better still to see full engine detail and opening front hood
......Detail looks super fine.... but why mould everying into the body shell Revell????? surely it could have been made with the main under-hood components as separate parts?.... it would only need to be 4 or 5 extra components..
Painting will be a challenge.

https://scontent-syd2-1.xx.fbcdn.net/v/t1.0-9/17458138_10208688255985391_2150795980183300801_n.j pg?oh=a6802472a890b9bdc6e5eccd1dbf7fdd&oe=5957C98E

https://scontent-syd2-1.xx.fbcdn.net/v/t1.0-9/17499297_10208688255945390_5910307763754168927_n.j pg?oh=6c2c7758bba3b5ae284a5914ffdee807&oe=595F4817


https://scontent-syd2-1.xx.fbcdn.net/v/t1.0-9/17424661_10208688255865388_3426622203192870749_n.j pg?oh=21093c1989078df532d7fcfd254231ba&oe=596E997C


Regards,
Dan

My thoughts exactly, masking won't be fun.

Trevor

Think could be easier to cut it before painting...

... but why mould everying into the body shell Revell????? surely it could have been made with the main under-hood components as separate parts?.... it would only need to be 4 or 5 extra components...Dan
I think for simplicity of the casting mold...

Cut them apart, paint them and then assemble them. A small challenge for a model builder.