Hazard light mod help?

holla homiez listen i got an idea for a mod i wanna do but i dont know shit about electrical and dont know where to start so here it is..

Normally when you push hazard button the front bumper lights blink..
but i dont want that i wanna make it so that they stay on but i dont wanna have to splice wires to connect to the side marker, is their any way to like remove or change a relay so that it doesnt blink and it just stays on from the default wiring? i would be willing to do some wiring so that it would work that way aslong as i dont gotta splice into my corners..
thanks alot y0 y0u all 0wnz.

anyone know?

the easiest thing to do would be to open up the dash and find where the wiring leads to the blinking circuit. all you have to do then is bypass it with some new wiring. all you need is power going to each light, then let them ground to something. the switch will just be used to make or break the connection between the power and the light.

can you gimme more detailed info. like exactly wut to look for. id appreciate it alot thanks

ive never dug around under there, so i dont know exactly where it is or what it looks like. there should be a box somewhere with some capacitors in it to make the lights flash. just wire around it and you should be set. get a haynes to find out where this part is at and what the wiring diagrams are for it, so you know where the power wires to each light are and where power from the battery comes from.

ty for yer help but i decided its not worth fucking around especially i dunno shit about electrical