Rotors and Calipers :S

I am more than likely buying Civic91's EBC turbo groove rotors and the calipers off of the 1.6 16v (D16A9),

now my question is, will they fit straight onto my 1.3 without ANY modifications the the mountings or anything like that, as i dont want it too be much work,

cheerz

Jim

*BUMP*

Come on someone must know

Do you know if they are the same size i.e. discs. You could try asking a local scrappies as most have cross-reference books for parts.

well the ones i have now are NOT vented discs and the ones i am changing too are bigger and are vented, but if i get the calipers too there shouldnt be a problem there, the only thing is if they will bolt straight on or not :S

I guess you won’t know until you try it. The brake upgrade I did on mine required custom mounting brackets, but this was for a 4 pot calliper with 290mm discs.

I doubt you’ll have that much problems fitting them even if they don’t go straight on, might need some spacers or get a machine shop to do you a bracket.

ah right, well hopefully they will just bolt straight up to the stock brackets, ill have to try em and see then

cheerz ;)