B16a
nt531
06-16-2003, 05:39 PM
where can you find prices on b16a engine and what kind of modifications are needed to fit it into a 88 crx hf???
mellowboy
06-16-2003, 07:55 PM
Hey sup! For motors i heard alot of good stuff about www.hmotorsonline.com
To put a b-series motor in your car you'll need custom aftermarket mounts and shift linkage from either www.hasport.com or www.hcpengineering.com both are good! For axles u'll need the 90-93 integra along with there intermediate shaft. Also since you have an HF you'll need to change the hubs into either crx/civic si or dx. You will also need to bang the drivers side wall to the alternator can fit right throungh and not hit the wall. I'm pretty thats about it. Good luck with your swap.:smile:
To put a b-series motor in your car you'll need custom aftermarket mounts and shift linkage from either www.hasport.com or www.hcpengineering.com both are good! For axles u'll need the 90-93 integra along with there intermediate shaft. Also since you have an HF you'll need to change the hubs into either crx/civic si or dx. You will also need to bang the drivers side wall to the alternator can fit right throungh and not hit the wall. I'm pretty thats about it. Good luck with your swap.:smile:
Automotive Network, Inc., Copyright ©2026