Roadmaster Estate wagon lens cover removal for tail light

I have a bulb needs replacing and since I can't see screw 1 on the lens cover for the tail lights,I guess it snaps in place.But I don't want to break something,so anyone know the exact way they come off?I am talking about the 1995 Buick RM Estate wagon.Thx:banghead:

My generic info for the wagon says to remove the rear quarter inside trim panel from the effected side, then detach the retaining nut and screws securing the rear tail lamp housing, then pull the tail lamp assembly outward to access the bulbs.

Its a Real PITA. You do have to pull the interior trim to get to the screws which are inside the cabin of the car. So go ahead and buy all of the bulbs you need and replace them all while you are in there.

Its a Real PITA. You do have to pull the interior trim to get to the screws which are inside the cabin of the car. So go ahead and buy all of the bulbs you need and replace them all while you are in there.Just to be sure we're talking about the same car.Do you mean the rear trim area with the glove box behind the tail light?

The left side you need to take off the panel at the rear glove box, the right side you can reach it by way of spare tire cover, like has been said get all three blubs for the left side just so you don't have to do it for a while ,they have one side light and two tail lights.Get the type of blub from your auto parts store.On 1996 Buick RMW.