87 f150 5.8 want to convert to efi

im trying to see if 95 351 intake will fit my 87 engine

im trying to see if 95 351 intake will fit my 87 engine
Unfortunately , there's more to the swap than just seeing if the manifold will fit your earlier model engine ? The electronic fuel injection is controlled by a computer which gets many various inputs from numerous sensors . For the engine to run properly , all these sensors ( along with all associated wiring ) would have to be in place and working properly . Also , many of the later model EFI engines feature distributor-less ignitions and your older model engine may ( or may not ) be so equipped ? So that issue would have to be addressed as well . There are numerous aftermarket EFI set-ups that come as kits with all needed parts and all you have to do is have a bung(s) for the O2 sensor(s) welded into place on the exhaust . Edelbrock is one of the more well known companies selling these kits but there are others as well . Go to www.summitracing.com or www.jegs.com and check these kits out . Good luck !