Check out this cool Skyline
Speedfreak17
11-10-2001, 05:39 AM
This Skyline is not Ready
Stage 2 is on its way !!
Stage 1 specifications:
Current power: Greater than 450kW (~600 BHP) at all four wheels, in 3rd gear (due to 200km/h speed limit on Dyno Dynamics dynos) with ramp rate at 1.00 using 275/18/45 tyres.
Engine designation: Nissan RB26DETT: 2.6 litre, Double overhead cam, Electronic fuel injection, Twin Turbo
Displacement: 2,568cc
Bore x Stroke: 86mm x 73.7mm
Redline: Upto 9,000 rpm
Boost: Upto 2.2 Kg/cm2
Static compression: <Undisclosed>
Camshaft specs: <Undisclosed>
Exhaust manifold: Custom Inconnel extractors, split as 2 banks of 3 cylinders, each feeding one turbocharger and external wastegate
Turbo chargers: HKS GT-2835R with customised exhaust housings (x2) and custom water cooling modification
Waste gates: HKS 58mm external GT wastegates (x2)
Exhaust: A'PEXi N1 Dual with custom 3.25" dump pipes from each turbo and wastegate
Intake: A'PEXi Power Intake pods (x2)
Intercooler: A'PEXi Drag Vmax/SPL
Pressure relief: A'PEXi Dual chamber blow off valves (x2)
Fuel system: HKS fuel rail, HKS fuel pressure regulator, custom 2 litre swirl pot, Bosch Motorsport 500HP fuel pumps (x2), Blitz 700cc injectors (x6)
Cam adjustment: HKS vernier cam wheels (x2)
Computer: A'PEXi Power FC Pro ECU with FC Pro link
Boost control: A'PEXi Super AVC-R boost controller
Clutch: Nismo twin plate 8.5" with uprated 6,750lbs pressure plate
Drive train: Nissan 5 speed standard with uprated Nismo input shaft, Nismo short shift kit
http://www.exvitermini.com
:cool: :cool: :cool: :cool: :cool: :cool:
Stage 2 is on its way !!
Stage 1 specifications:
Current power: Greater than 450kW (~600 BHP) at all four wheels, in 3rd gear (due to 200km/h speed limit on Dyno Dynamics dynos) with ramp rate at 1.00 using 275/18/45 tyres.
Engine designation: Nissan RB26DETT: 2.6 litre, Double overhead cam, Electronic fuel injection, Twin Turbo
Displacement: 2,568cc
Bore x Stroke: 86mm x 73.7mm
Redline: Upto 9,000 rpm
Boost: Upto 2.2 Kg/cm2
Static compression: <Undisclosed>
Camshaft specs: <Undisclosed>
Exhaust manifold: Custom Inconnel extractors, split as 2 banks of 3 cylinders, each feeding one turbocharger and external wastegate
Turbo chargers: HKS GT-2835R with customised exhaust housings (x2) and custom water cooling modification
Waste gates: HKS 58mm external GT wastegates (x2)
Exhaust: A'PEXi N1 Dual with custom 3.25" dump pipes from each turbo and wastegate
Intake: A'PEXi Power Intake pods (x2)
Intercooler: A'PEXi Drag Vmax/SPL
Pressure relief: A'PEXi Dual chamber blow off valves (x2)
Fuel system: HKS fuel rail, HKS fuel pressure regulator, custom 2 litre swirl pot, Bosch Motorsport 500HP fuel pumps (x2), Blitz 700cc injectors (x6)
Cam adjustment: HKS vernier cam wheels (x2)
Computer: A'PEXi Power FC Pro ECU with FC Pro link
Boost control: A'PEXi Super AVC-R boost controller
Clutch: Nismo twin plate 8.5" with uprated 6,750lbs pressure plate
Drive train: Nissan 5 speed standard with uprated Nismo input shaft, Nismo short shift kit
http://www.exvitermini.com
:cool: :cool: :cool: :cool: :cool: :cool:
SafT
11-10-2001, 06:05 AM
Look on these Forums for MarioGTR, he has a car that used to closely match that spec, and a website that closely matches that URL, and probably looks the same as the owner of that car as well :rolleyes:
Speedfreak17
11-10-2001, 07:56 AM
Its the same car !!
NX1600
11-10-2001, 03:42 PM
I see no pic?!
b.t.w is this Skyline in Holland?
Never seen one here!
b.t.w is this Skyline in Holland?
Never seen one here!
SafT
11-10-2001, 05:39 PM
Its in Australia
NX1600
11-10-2001, 05:43 PM
damn.... too bad there aren`t any skyline here in Holland :zx11pisse
GTS-4 Ben
11-11-2001, 04:38 AM
:rolleyes: haha.
Man I love that car
Man I love that car
Automotive Network, Inc., Copyright ©2025