So yet another problem

I notice when I use the windshield wiper fluid my car will stall for a bit, but get back to running normally once it seems things dry off. It's like whenever you drive over a big puddle how it stalls and you have to wait a little to get going again or when you restart. What can this be? Man, I have so many problems with my car as people can see with my posts. I wish I had what was needed to get something new. I'm screwed.

Does the washer fluid spray on the windshield with good force, or does it just kind of trickle out of the nozzle? If you just get a trickle, then either some of the fluid may be spraying on an electrical unit under the hood, or you might have a weak charging system.

-Rod

I thought I had a leak in the washer fluid reservoir, but it turns out that my feeder hose was cut/separated and I was unloading a bottle worth of fluid under the hood. I bought a tiny cheap little plastic doohicky to join up the two ends of the hose and it worked for a short period of time before the water pressure caused it to pop apart again so I also taped the joint and now its fine. So open the hood of your car, have someone activate the fluid, while you watch under the hood to see what's happening.