Yamaha YZR M1 Valencia Test 2009 Valentino Rossi

modellerone

08-01-2012, 02:45 PM

modellerone

08-06-2012, 10:18 AM

Hey,
I have something to go on the rear.
Carbon and electronics.
http://foto.arcor-online.net/palb/alben/78/7612878/3766336137346133.jpg
http://foto.arcor-online.net/palb/alben/78/7612878/6231653263666339.jpg
http://foto.arcor-online.net/palb/alben/78/7612878/3962363532633963.jpg
http://foto.arcor-online.net/palb/alben/78/7612878/6665633339626134.jpg
http://foto.arcor-online.net/palb/alben/78/7612878/3332373566326262.jpg
http://foto.arcor-online.net/palb/alben/78/7612878/3231326438666465.jpg
http://foto.arcor-online.net/palb/alben/78/7612878/3034323230623836.jpg
That's it for today. I hope you like it
Marcel

KevHw

08-07-2012, 11:51 AM

Looking good so far. I like the front camera you've added.

miguel s

08-07-2012, 01:11 PM

Hey,
enclosed pictures of my new WIP.

Next, I modeled the tire structure,
http://foto.arcor-online.net/palb/alben/78/7612878/3830386532353935.jpg
http://foto.arcor-online.net/palb/alben/78/7612878/6233363032386536.jpg

Bye Marcel
only for this detail i will give you 5 stars :thumbsup:
can you tell us how to do it?

John18d

08-07-2012, 06:38 PM

Interesting details you have added Marcel - is that the "renaissance" camera set you are using? I have a pkg of them but there are no instructions and I have not found any reference pictures for it. - John

modellerone

08-08-2012, 03:21 AM

hey,
nice that you like it.
@ Miguel,The hairs are from my son,I glued them and paintet it with Tamiya Rubber Black.
@John,yes,that`s the Rennaissace Kit.Also, I have no instructions.All fantasy.

Sorry for my bad English.
Marcel

John18d

08-08-2012, 05:04 AM

Marcel - Where did you get the tire marking on the sidewall from - not the hair or the "bridgetones" but the other little MFG tags on the sidewall?? Thanks - John

modellerone

08-08-2012, 11:11 AM

Hey,
http://www.domino.be/getPic.php?foto=NLD043.jpg

Marcel

modellerone

08-13-2012, 02:18 PM

Hello,
I continued on the back side.
http://foto.arcor-online.net/palb/alben/78/7612878/6336323634363932.jpg
The rear Fender...
http://foto.arcor-online.net/palb/alben/78/7612878/6332313461376634.jpg
http://foto.arcor-online.net/palb/alben/78/7612878/3734626262653434.jpg
TopStudio Chain...
http://foto.arcor-online.net/palb/alben/78/7612878/6463653262393936.jpg
And assembled...
http://foto.arcor-online.net/palb/alben/78/7612878/3835313238653634.jpg
http://foto.arcor-online.net/palb/alben/78/7612878/6637306366313934.jpg
...Sorry for the very poor images,
I'll be better
Marcel

John18d

08-13-2012, 04:45 PM

marcel - your chain looks like a full scale one - very well done - John

modellerone

08-21-2012, 01:34 PM

Hey,

I again do not show much, but the front fender and a part of the Cover I've finished.
http://foto.arcor-online.net/palb/alben/78/7612878/3139653961646236.jpg
http://foto.arcor-online.net/palb/alben/78/7612878/6537393231306262.jpg
http://foto.arcor-online.net/palb/alben/78/7612878/6264356531313365.jpg
http://foto.arcor-online.net/palb/alben/78/7612878/6337616263363361.jpg

I hope you like it
Marcel

John18d

08-22-2012, 02:02 PM

Marcel - that pit board really looks the business - John

generationx

08-23-2012, 04:43 AM

Really excellent WIP!

modellerone

08-26-2012, 10:36 AM

Hey,
I am very pleased that you like it

Today I got the parts for the engine ready.
http://foto.arcor-online.net/palb/alben/78/7612878/6361373264306431.jpg
Then I put everything in its place.
http://foto.arcor-online.net/palb/alben/78/7612878/6461636234613432.jpg
http://foto.arcor-online.net/palb/alben/78/7612878/6664616363373561.jpg
http://foto.arcor-online.net/palb/alben/78/7612878/6631346133653339.jpg

Recently I installed the engine in the frame.
http://foto.arcor-online.net/palb/alben/78/7612878/6535366161643362.jpg
http://foto.arcor-online.net/palb/alben/78/7612878/6430316565336237.jpg

Soon it goes on,
Marcel

John18d

08-26-2012, 10:53 AM

Marcel - are you using the wiring diagram from Top Studio for the engine wiring or is this "free license" - it looks very good. Your engine is nicely detailed and painted - John

Marcel - where did you get the "pit board" above in the pictures - it looks like a real one - John

modellerone

08-26-2012, 02:31 PM

hey John,
the wiring diagram is from TopStudio,
the Pit Board is from FG Model.I found it on ebay.Although it is a 1:20 scale, but fits great.
Marcel

John18d

08-26-2012, 10:08 PM

Thanks Marcel - you are doing an excellent job on your scale replica - you and Sandro - Andrea - and Youngun are really stepping up the standards for the motorcycles - John

modellerone

08-28-2012, 06:15 AM

Hi John,
I am very happy that you like my work, but as good as the other guys I'm not a long time.
regards Marcel

modellerone

09-03-2012, 02:53 PM

Hello,
Piece by piece, it goes with me further.
I worked on the exhaust.
Sawed, Primed and painted with Holomatic Spectral of Alclad Chrome.
http://foto.arcor-online.net/palb/alben/78/7612878/6362653966626636.jpg
http://foto.arcor-online.net/palb/alben/78/7612878/3764666632373562.jpg
http://foto.arcor-online.net/palb/alben/78/7612878/3534336434666638.jpg
http://foto.arcor-online.net/palb/alben/78/7612878/3735616430633236.jpg
http://foto.arcor-online.net/palb/alben/78/7612878/3239343166353865.jpg
http://foto.arcor-online.net/palb/alben/78/7612878/6663653036643131.jpg
The days I'm going to show you pictures from the handlebar and cockpit.

Bye Marcel

John18d

09-03-2012, 03:09 PM

the holo-matic spectral paint looks great- very real for a stainless steel exhaust system - John

modellerone

09-09-2012, 08:49 AM

Hello,
even if it seems that you do not like so much, I'll be happy to.
I got to work on the handlebars.
http://foto.arcor-online.net/palb/alben/78/7612878/6536326338363962.jpg
http://foto.arcor-online.net/palb/alben/78/7612878/3133623630363865.jpg
http://foto.arcor-online.net/palb/alben/78/7612878/3064316433663861.jpg
The tail and the cockpit, I can mount it.

http://foto.arcor-online.net/palb/alben/78/7612878/3833306131656234.jpg
http://foto.arcor-online.net/palb/alben/78/7612878/3133393137623834.jpg
http://foto.arcor-online.net/palb/alben/78/7612878/3032373631666266.jpg
http://foto.arcor-online.net/palb/alben/78/7612878/3336363934333932.jpg

That's it for today.
Let it rip,
greetings Marcel

John18d

09-09-2012, 09:39 AM

Marcel - is that the T2M cable adjuster set?? or Top Studio? I've seen the T2M parts and they are teeny tiny - way too small for me to work with - lol - John

modellerone

09-09-2012, 09:42 AM

Hey John,
T2M.

John18d

09-09-2012, 10:02 AM

Hey John,
T2M.

WOW - I don't know how you guys can work with such small parts - my fingers are way to "fat" big and shaky for that - even with precision tweezers - That would absolutely frustrate me because I know I would drop the parts a few hundred times - lol - John

modellerone

09-12-2012, 01:20 PM

Hello,
again there is a little update from me.
I installed the exhaust and radiator.
http://foto.arcor-online.net/palb/alben/78/7612878/6662646265383131.jpg
http://foto.arcor-online.net/palb/alben/78/7612878/3035626337343837.jpg
http://foto.arcor-online.net/palb/alben/78/7612878/6633343764636534.jpg
http://foto.arcor-online.net/palb/alben/78/7612878/6564386164616330.jpg
http://foto.arcor-online.net/palb/alben/78/7612878/6164656336353538.jpg
http://foto.arcor-online.net/palb/alben/78/7612878/3634666665663764.jpg
Would be glad if I would rather hear from you.
Marcel

John18d

09-12-2012, 02:11 PM

WoW Marcel - this gets better and better with each posting - the heat stain on the exhaust "down-tubes" is perfect - is that just the holo-matic paint or is it a mix of AlClad heat stains? also the corrugated tubing coming off the exhaust O2 sensors - is that from T2M? Did you put metal screen on both sides of the radiators? And last are you going to make a "Top Studio" chain for this build? - if you do can you photo the process and describe it for me? I have tried to make two chains and both times it has been unsuccessful for me. I don't know how Andrea - Sandro - and YongGun do them so easily. This is looking so good - lots of small details - John

modellerone

09-21-2012, 06:44 AM

kans0002

09-21-2012, 09:31 AM

Marcel - this looks AMAZING! so many details it is hard to pick out my favorite one...

Stu

John18d

09-21-2012, 09:46 AM

Simply stunning Marcel - like Stu says "so many details to pick out" - was the tool box from MFH? I see they do some PE tool boxes - also come on share some details on the making the chain???? - what do you use to hold the parts of the chain so you can turn over the "jig" and work on the other side of the links?? do you use a glue to hold everything? What kind? I'm careful too but my links always "pop" off - when I turn the jig over - lol - you and Sandro and YongGun really do some nice chains - also like the "brake covers in the last picture? First time I've seen anyone use them - John

modellerone

09-22-2012, 05:44 AM

Hello,
I am very happy that you like it.

The toolbox is from T2M and the Cold Weather Brakedisc Cover is from Lion Roar.

In the chain I use the associated devices.
There is nothing Bonds, tapped gently with a hammer.

Marcel

YongGun Park

09-24-2012, 01:07 AM

WOW... It looks great.

modellerone

10-14-2012, 09:38 AM

Hello,
I think the bike itself is finished.
Now it goes to the side issues.
http://foto.arcor-online.net/palb/alben/78/7612878/3031636333333639.jpg
http://foto.arcor-online.net/palb/alben/78/7612878/3262386232653634.jpg
http://foto.arcor-online.net/palb/alben/78/7612878/6462383935373134.jpg
http://foto.arcor-online.net/palb/alben/78/7612878/6166343166633962.jpg
http://foto.arcor-online.net/palb/alben/78/7612878/3831636434376163.jpg
http://foto.arcor-online.net/palb/alben/78/7612878/3065643634616461.jpg
http://foto.arcor-online.net/palb/alben/78/7612878/6563663438323534.jpg
I hope you like it,
Marcel

miguel s

10-14-2012, 12:17 PM

Hello,
I think the bike itself is finished.
Now it goes to the side issues.

I hope you like it,
Marcel
How could we not like it? :)
the chain, rivets, wire... everything its perfect.
Impossible to see a glue drop anywhere. I dont know how you can do it.

John18d

10-14-2012, 06:02 PM

WOW - Marcel - this really came out awesome. As for "liking it" - I think we are all going to really like this one - I do

cannot tell it from the real thing - excellent attention to detail

John

sportracer02

10-15-2012, 07:05 AM

I saw the model recently - amazing CF-job !!!!

modellerone

10-29-2012, 10:48 AM

John18d

10-29-2012, 03:25 PM

wonderful display Marcel - no one has done it like that before.
amazing detail in the bits
cheers
John

SandroSilva

10-29-2012, 03:27 PM

Construction Marcel very good, the details of the diorama gave a highlight to any particular model, congratulations.

Sandro

Daznfaye

02-09-2013, 02:20 PM

Ive looked and looked so many times at this build and have to say its stunning,faultless and a real credit to your skills Marcel :)

racer93

03-04-2013, 04:59 PM

Very nice kit and eye for detail!

I did one from '08 (Lorenzo's Lands) set up like that--great minds think alike, I guess! ;)

John18d

03-09-2013, 05:46 AM

Really outstanding work Marcel
John

Add your comment to this topic!

Our Community is over 1 Million Strong. Join Us.

GET HEALTHY AFFORDABLE DOG FOOD

DEVELOPED BY THE AUTOMOTIVEFORUMS.COM FOUNDER & THE TOP AMERICAN BULLDOG BREEDER IN THE WORLD THROUGH DECADES OF EXPERIENCE. WE KNOW DOGS.

CONSUMED BY HUNDREDS OF GRAND FUTURE AMERICAN BULLDOGS FOR YEARS.

NOW AVAILABLE TO THE GENERAL PUBLIC FOR THE FIRST TIME

PROPER NUTRITION FOR ALL BREEDS & AGES

Yamaha YZR M1 Valencia Test 2009 Valentino Rossi