Had a Good idea today !

Dudes, I was thinking about my b16 swap and was wondering how i was going to do the wirering... then I got to thinking...what if I made myself a harness... not the pinning one like the hasport one but a REAL harness.

Well the PR3 ECU i got still had the the plug on it, and I have an old PM5 ecu kicking around... I wanna take the old PM5 appart take the Plug out and link it to the harness that I got with the ECU except for the 4 wire I need to run to the bay, this way I can plug in my SI harness in my Plug that plugs into the ECU... pretty neet eh ?

this way if i ever need to put the ZC back in all i do is unplug the conversion harness.

Kinda like the odb-3 to odb 2 harness...

hell you might be able to make money sellin conversion harnesses and whatnot. kind of like car stereo wiring kits hehe

sound like a waist of time

http://www.4thgenerationcivic.com/Staff/LadynredSi/pics/wiring_harness_001.jpg

http://www.4thgenerationcivic.com/Staff/LadynredSi/pics/wiring_harness_003.jpg

that is what the jumper conversion harness looks like to run a p28 ecu....kinda sounds like the idea you're after :)

the 8 taped wires are the one that go out to the bay (4 alone go to o2 sensor)...wheeee!