Power Window Issues

Alright so I have been fidgeting far too long on this window, I need some help. The front passenger side window on my 2002 chrysler sebring does not work, I have pulled the door panel of and after hooking up the motor found that the motor does run. For some reason the switch when pushed up (to put the window up), has no response from the motor. Yet when pushed down the motor turns right on. The regulator seems to be in good shape, the motor seems to run okay and the switch seems to only want to turn the motor one direction (after having the motor removed from the regulator). By the way the switch on the drivers side door yields no response to the front or rear passsenger windows as well. Any advice on what the most likely problem here is would be greatly appreciated, thanks!

I have an update if this makes it any easier, i have narrowed it down a bit, the motor and regulator are deffinately fine, for some reason the window only wants to go down I get no response from the motor when i try to put the window up.

You have a broken wire in your door harness.

I would check the drivers door harness first.