next performance mods????

I am going to add some more goodies to my 04 Comp G to go along with the stuff in my signature. Need your guys input.

I am looking to add either w-body store headers or the ZZP 3" stainless catt'd downpipe and Plog. leaning torwards the downpipe and plog for ease of install. although I have the ability to install headers.

I will add 1.9 rockers with 90# springs and manley retainers.

I am going to keep my stock cat back exhaust with the deleted resonator. next year I will upgrade the cat back.

Also putting the poly control arm bushings and sway bar bushing on.

Dropping from the 3.6 MPS to either a 3.4 or 3.5 pulley.

installing the Aeroforce interceptor gauge. I also have a hand held scanner.

any thoughts on what a ported supercharger housing and lower intake would do??? never had experience with this setup.

any other suggestions???

I do not have any insight on what you should do for mods, but I did want to chime in and let you know to be careful when dropping pulley sizes on the L32. I have heard that the L32 responds to mods much differently than the L67…so as the rule goes scan, scan, and scan again for KR.

I do see you are installing the Aeroforce gauge, so you should be fine.

Yeah for some reason they are more prone to knock. I have the MPS so if I am having issues I can change back to a bigger pulley.....

I decided to put pacesetters on it. best quality for the price, even if I get the ceramic coating. These along with the 1.9 rockers should help a lot with knock.