Tamiya Taisan Starcard Porsche 911 GT2 1995 1/24

Hi everyone, I have not written here in Motorsports because, until now, I have done only motorcycle models.

For my first car model I decided to start with a classic Tamiya 1 / 24, Porsche 911 GT2 1995 Taisan Starcard. This is a curbside model and should not be too complicated.
For a great start I will start two models of Porsche, one for me and one will be a gift for my brother.

https://lh5.googleusercontent.com/-rLOmRM6QXRc/TlYqtzL33aI/AAAAAAAAEec/zo30hw228Yc/s912/IMG_7762.JPG

This is the package contents...

https://lh5.googleusercontent.com/-qqR9NTm-Z2Q/TlYqhq9A-nI/AAAAAAAAEeA/Jgac65izbpo/s912/IMG_7342.JPG
https://lh3.googleusercontent.com/-9c3ETLLABGA/TlYqjLzgA8I/AAAAAAAAEeE/efYEAN1qYig/s912/IMG_7344.JPG
https://lh4.googleusercontent.com/-Dd8erD1obPQ/TlYqkrXDM5I/AAAAAAAAEeI/GFuZkMBkvwY/s912/IMG_7345.JPG
https://lh3.googleusercontent.com/-LnR0Y94UYrY/TlYqmWKbNWI/AAAAAAAAEeM/JuwCossn8x0/s912/IMG_7349.JPG
https://lh5.googleusercontent.com/-7yZSiCxUXaY/TlYqoU8xvkI/AAAAAAAAEeQ/2nfvWe66L0c/s912/IMG_7351.JPG
https://lh4.googleusercontent.com/-JMcsPlRPsvU/TlYqpV7YPSI/AAAAAAAAEeU/3Ivvci63NAo/s912/IMG_7353.JPG
https://lh3.googleusercontent.com/-6eaDo9ZFPzA/TlYqql6yrlI/AAAAAAAAEeY/OEqHykMgjJA/s912/IMG_7354.JPGhttps://lh5.googleusercontent.com/-LhZ3GfG6Mss/TmIvJ8vfTvI/AAAAAAAAEho/qwxd3LVDvTM/s1152/IMG_7764.JPG

I started working on the body. Panel lines scribed, imperfections cleaned, hooks bonnet eliminated, fenders drilled... A first pass of grey primer and I moved on...
then I will give white primer...

https://lh6.googleusercontent.com/-7HFs3g1QeUU/TmIvLI3TmLI/AAAAAAAAEhs/mEzWh8AsxdI/s912/IMG_7767.JPG

https://lh4.googleusercontent.com/-PkwlbnQnpjw/TmIvMEu9_sI/AAAAAAAAEhw/tnhLBssg5JY/s800/IMG_7771.JPG

https://lh3.googleusercontent.com/-AamNcYkQpW8/Tn4Nndgfn2I/AAAAAAAAEl0/UH8RHQhXAHg/s800/IMG_7864.JPG

https://lh3.googleusercontent.com/-1Cm1JsS3_EY/Tn4Nt9VJc7I/AAAAAAAAEl8/iNVWsqL2jhU/s912/IMG_7867.JPG

https://lh3.googleusercontent.com/-j9Rw-AubU2Y/Tn4NvHykXEI/AAAAAAAAEmA/EqjaJIWJr1o/s912/IMG_7868.JPG

https://lh6.googleusercontent.com/-ar4rq509eV4/Tn4Nxr_50gI/AAAAAAAAEmI/JXycTbG4MI4/s912/IMG_7870.JPG

https://lh3.googleusercontent.com/-vxt8IpwSqj0/Tn4N0M9wuYI/AAAAAAAAEmQ/6-gbPyb0UPo/s800/IMG_7872.JPG

https://lh3.googleusercontent.com/-8ZLlL0EPa7E/ToMMN2TIoyI/AAAAAAAAEnE/8Gvp4vImAOs/s800/IMG_7893.JPG

https://lh6.googleusercontent.com/-lK8kn6NEmKs/ToMMS4vrvmI/AAAAAAAAEnk/yg_YDfAvUe0/s800/IMG_7894.JPG

https://lh3.googleusercontent.com/-xCZK1xJ7460/ToMMVVwup8I/AAAAAAAAEnM/3UE2XCPUoU4/s800/IMG_7896.JPG

https://lh5.googleusercontent.com/-YP6E5UNvxYQ/ToMMWM0xZcI/AAAAAAAAEnQ/xnRnltuG_PI/s800/IMG_7897.JPG

without photo reference it's very difficult to work...
using the cover box like reference I modified the wing by inserting a small net...

https://lh6.googleusercontent.com/-WsDAJ6d-XXY/ToMPohc4ydI/AAAAAAAAEns/XkQhPyS2osU/s378/IMG_7340.JPG

https://lh6.googleusercontent.com/-tzG8RzAzRUA/ToMMa9MjM4I/AAAAAAAAEnc/TGG_zR6ulSw/s640/IMG_7900.JPG

https://lh3.googleusercontent.com/-J11I2diI7kE/To2SpiynwnI/AAAAAAAAFwg/EZ8Sa60U7Xk/s640/IMG_7937.JPG

https://lh3.googleusercontent.com/-FHb0-lDov8A/To2SqflEuFI/AAAAAAAAFwk/z3V25Rnhk-U/s640/IMG_7939.JPG

https://lh4.googleusercontent.com/-DWx4fdM_eEE/To2SrP-mklI/AAAAAAAAFwo/xooi2aBy4PQ/s640/IMG_7941.JPG

https://lh3.googleusercontent.com/-W6DDB0HSpQU/TobSua_DNgI/AAAAAAAAFvc/A2W0ayRZk3Q/s640/IMG_7906.JPG

new update...

I painted the frame and the engine...

https://lh3.googleusercontent.com/-m_UDrZRFdmw/TsA-92kjTJI/AAAAAAAAGCI/PKM_hZ4ROqQ/s912/IMG_8128.JPG

https://lh4.googleusercontent.com/-DOpqj1s9_84/TsA-8M4jSRI/AAAAAAAAGCE/JfoFbGJ6TPY/s912/IMG_8127.JPG

Nice job! I'm watching, even it nobody else is... ;)

ianc

Nice start. I will watch with interest as I just added this kit to my stash.

Nice work, looks like you're making clean progress. I've got this kit on hold so will follow your build closely for inspiration.

Very nice start. Clean work and attention for detail, well done zed !

A few refs, maybe useful:

http://www.compucars.co.uk/used-cars/porsche/911/for-sale/?1636266

http://www.fantasyjunction.com/cars/828-Porsche-Factory%20993%20GT2%20with%2097%20Evo%20package-Flat%206%20Cyl%203.6%20Litre%20twin%20turbo

http://www.turbokraft.com/gallery/v/993-Turbo/993+GT2+Engine/993-GT2-Racecar-PCM-Electronics.jpg.html

http://www.carclassic.com/Porsche_911_-_993_GT2_Clubsport_540_HP_-_Factory_Clubsport_version_EA78.html

http://www.history-of-cars.com/php/porsche/1995-993-gt2-club-sport.php

Robi

More reference: https://picasaweb.google.com/carslegend/Porsche993GT2

I suggest that you remove the connectors/switches in front of the windshield before you paint the body. They are not very realistic in the first place, and they would look absolutely shapeless under a few layers of paint.

Check this out: http://www.automotiveforums.com/vbulletin/showpost.php?p=5956939&postcount=61

Two for one!!! good star work!!
I liked!

Thank you all for the compliments...
Robi J and eugene78 thanks for reference...

I worked on gearbox and suspensions, all components are lightly dirty..

https://lh6.googleusercontent.com/-juJO9DsRm7M/TsA-_Y-YS2I/AAAAAAAAGDI/3QJ3dFn6aFM/s800/IMG_8131.JPG

https://lh6.googleusercontent.com/-nH7cYwRe_NM/TsA_AhvzO4I/AAAAAAAAGB4/Ena6qtX0nR4/s800/IMG_8132.JPG


https://lh4.googleusercontent.com/-XUSQXoTHx7Y/TsA_CNKDPYI/AAAAAAAAGD8/XcakmQJtEJM/s800/IMG_8134.JPG
https://lh5.googleusercontent.com/-ikWpM0MtC7k/TsA_DjMmnmI/AAAAAAAAGCA/89UN8daFUjU/s800/IMG_8137.JPG

After I gave an effect of dry dirt on lower side frame...
and I have dirtied the engine... slightly

https://lh6.googleusercontent.com/-ipoAZZWr3TY/Tsk5MKI8RhI/AAAAAAAAGCc/iBxkd_Lf-bI/s800/IMG_8153.JPG

https://lh5.googleusercontent.com/--iE0enfQVUo/Tsk5O2jwPfI/AAAAAAAAGCg/BvKXcQBYJ4k/s800/IMG_8154.JPG

https://lh6.googleusercontent.com/-rZBSFZzWFIU/Tsk5KxXRhNI/AAAAAAAAGCY/ARJ_nKOveek/s800/IMG_8151.JPG

https://lh6.googleusercontent.com/-YpOw-hWbC4k/Tsk5JlH6_VI/AAAAAAAAGCU/GRbbY-WizUQ/s800/IMG_8150.JPG

Hi Zed Red - I'm going to follow this one too - John

What a great start! I love watching double-projects like this, each car ends up with it's own characteristics and "personality".

Hi Zed Red - I'm going to follow this one too - John

Hi John18d, this is my first car model, I hope to do a good job...

I worked on the brake discs ... I drilled discs of a porsche as a test, for me test is ok

https://lh6.googleusercontent.com/-Af_scDyzZCo/TnHmkrgGNXI/AAAAAAAAEjY/sVNNGnr_lYY/s800/IMG_7797.JPG

https://lh5.googleusercontent.com/--8Si0w63bk8/Tsk5QHmbVOI/AAAAAAAAGCk/IId8k5cgfEw/s800/IMG_8156.JPG

Zed red - brakes look good - no need for photo etch here - if you apply the skills you have on the bikes to these Porsches - they'll come out great - John

I painted and fitted the exhaust system, then I installed suspension and brakes...

https://lh4.googleusercontent.com/-w57f9OdNhfs/TsmJo5AXBWI/AAAAAAAAGC8/-cpF2whOCDM/s912/IMG_8166.JPG

https://lh5.googleusercontent.com/-5O2BiQh2Vkg/TsmJnQTGtHI/AAAAAAAAGC4/JtMSwvUKr7U/s912/IMG_8164.JPG

https://lh3.googleusercontent.com/-rK5axxICLEc/TsmJkaNAklI/AAAAAAAAGCw/2hsmW-cQvWA/s640/IMG_8161.JPG

https://lh3.googleusercontent.com/-3gn7ovAOlHQ/TsmJitPfbDI/AAAAAAAAGCs/Z8YnyoW_d-w/s912/IMG_8158.JPG

https://lh6.googleusercontent.com/-O3dOQCyEA7k/TsmJlzk1NtI/AAAAAAAAGC0/7-wTDDoKQdI/s912/IMG_8163.JPG

https://lh5.googleusercontent.com/-wd2p0ql-ggY/TsmJqk1tJGI/AAAAAAAAGDA/kmAJcBc052Q/s912/IMG_8169.JPG

Great work zed red - I have this kit and the sogo keibi GT2 kits to build - John

Looking good; did you use the Tamiya weathering kit for the exhausts?

ianc

Looking good; did you use the Tamiya weathering kit for the exhausts?

ianc

In order:
Alclad II Stainless Stell, gradient Tamiya X-26 Clear Orange, Tamiya Weathering D Burnt Blue and Oil Stain

:evillol:

Wheels...

First I painted the inside with Alclad II Pale Gold, after alluminium on the center, air valves by Tunem Model Manufactory and BBS decals...

https://lh3.googleusercontent.com/-vyTyXt767kk/Ts-CQIGHk_I/AAAAAAAAGEw/wuDaCtanr3E/s912/IMG_8176.JPG

https://lh4.googleusercontent.com/-UfhsUipILtc/TtOVgIiIN0I/AAAAAAAAGE4/So6-8XY4ILM/s912/IMG_8181.JPG

https://lh4.googleusercontent.com/-AVqZofE2Dyo/TtOViXcPjcI/AAAAAAAAGE8/qNOjJEsztYs/s912/IMG_8187.JPG

Subscribed! Looking forward to more updates!

Later,
Lee

I'm trying to build the plumbing ... missing the main tube, but what about the unions?
I leave tin-colored piping or black paint?

https://lh6.googleusercontent.com/-6fzioJ-C9kw/TuNux25Hz6I/AAAAAAAAGJ0/xej8Kd9E_fE/s800/IMG_8195.JPG

https://lh3.googleusercontent.com/-qWC8vSX7rpc/TuNu0px1xxI/AAAAAAAAGJ4/BvAGn-jFR9E/s912/IMG_8199.JPG

zed red- leave the piping tin colored. It will stand out better against the black sheet metal - John

Why Tamiya makes the wheels with those edges on internal side???

https://lh3.googleusercontent.com/-vAVIRhpCp8U/TtlKtx5G7YI/AAAAAAAAGHc/apd5WAdhPds/s912/IMG_8191.JPG
https://lh6.googleusercontent.com/-NdZKykL-U50/TtlKvEFMlSI/AAAAAAAAGHg/a9f8qxSGmR8/s800/IMG_8192.JPG

I have removed them :naughty:

https://lh4.googleusercontent.com/-BLYfgEHdXlA/TvhIRGFHY6I/AAAAAAAAGSI/AvDyi3biO8A/s912/IMG_8203.JPG
https://lh3.googleusercontent.com/-Pq93Rp2TQ8c/TvhISies1dI/AAAAAAAAGSM/cwCQSGhw1PA/s800/IMG_8204.JPG

After I finished the plumbing, black in a Porsche, tin in the other...

https://lh4.googleusercontent.com/-K9Q8IpYOq70/TvhIPunlY5I/AAAAAAAAGSE/0Bizw-qYMH8/s800/IMG_8202.JPG
https://lh4.googleusercontent.com/-FRYmrjIsEtI/TvhIU0CU2eI/AAAAAAAAGSQ/pU5gn1Dk1W8/s800/IMG_8206.JPG

for the last seats... I painted the rear with a net to simulate the carbon fiber, for the front I used flour mixed with paint... do you like it?

https://lh6.googleusercontent.com/-YVSFzELqgRE/Tvh3QJNRDNI/AAAAAAAAGSU/19tAGMN9Gzw/s800/IMG_8213.JPG
https://lh3.googleusercontent.com/-iUHX-__bQmY/Tvh7X18vdNI/AAAAAAAAGSw/2p4mzAC5Rl8/s800/IMG_8215.JPG

That's looking like some really clean progress you're making. The engine area and suspension look really nice. I'm not sure I fully understood what you did to the wheels; did you grind the plastic flush with tyre wall? Seats came out well too. :thumbsup:

zed red - the seats look great - the whole build is coming along nicely - John

I'm not sure I fully understood what you did to the wheels; did you grind the plastic flush with tyre wall?

I drew the arrows that indicate the edges of the rims that come out from the shape of the wheel.
https://lh3.googleusercontent.com/-Vhi7qJh-snM/Tvl0Y0ACHBI/AAAAAAAAGS4/IXkPrg8mtag/s912/IMG_8191b.jpg

As seen in this picture I removed those edges :grinyes:

https://lh4.googleusercontent.com/-BLYfgEHdXlA/TvhIRGFHY6I/AAAAAAAAGSI/AvDyi3biO8A/s912/IMG_8203.JPG

Much better!! Good idea!!

Very neat and thanks for clearing that up.

I painted the dash, black slightly diluted under high pressure so as to obtain a slightly rough surface. After I applied the decals and above the decals I applied DR. TOFFANO SYNTHAGLASS. This is a resin like glass.

In the pics you can see the dash at the top with synthaglass, the bottom one without... for me it's great effect :grinyes:

https://lh5.googleusercontent.com/-lLYeAcDG6ec/TvnJIU1edgI/AAAAAAAAGS8/lq7U0-1Mvig/s800/IMG_8217.JPG
https://lh6.googleusercontent.com/-6XYxZNHu1XM/TvnJJnQuy8I/AAAAAAAAGTA/2dsgz7LMrc0/s800/IMG_8218.JPG
http://www.drtoffano.com/toffano_img/drtoffano_synthaglass_gruppo3.jpg

some update...

https://lh5.googleusercontent.com/-SIG0dMIHSRo/TwB4Iv7mzNI/AAAAAAAAGWg/upaA3goiiMw/s912/IMG_8224.JPG

https://lh5.googleusercontent.com/-U4-m7GClgkc/TwB4JxfNNuI/AAAAAAAAGWk/TNgIlS-bvog/s912/IMG_8227.JPG

https://lh5.googleusercontent.com/-yWtJd-rvOgc/TwB4LGz4DcI/AAAAAAAAGWo/BDBazWga9RE/s912/IMG_8229.JPG

https://lh3.googleusercontent.com/-prcXYZ0RoXE/TwB4Ms9cIeI/AAAAAAAAGWs/q71VVpH2V18/s912/IMG_8230.JPG

The interior of one of the Porsche is finished. I completed the second line fire extinguisher (the line passes under the dashboard). I made a electronic unit with plasticard (it's behind the drive seat), the last I completed the interior door.
I think that's enough for interior, now I will complete the interior of other Porsche...

https://lh5.googleusercontent.com/-ja7LzFaka3U/TwWshnfdaLI/AAAAAAAAGYY/zxM72NR4czw/s800/IMG_8261.JPG
https://lh5.googleusercontent.com/-lP0ZrlRIz28/TwWsftCxgwI/AAAAAAAAGYU/B7efcBFKMso/s800/IMG_8260.JPG
https://lh6.googleusercontent.com/-kvsprS4F0jQ/TwTjQ5o-12I/AAAAAAAAGYM/m_ibu4eeQbU/s912/IMG_8256.JPG
https://lh6.googleusercontent.com/-xbm0O0wHfIc/TwTjB-Zav-I/AAAAAAAAGXY/sgq1eLAUqMM/s800/IMG_8244.JPG
https://lh4.googleusercontent.com/--m62uQRun90/TwTjDawa4GI/AAAAAAAAGXc/OeFROnPEFU0/s800/IMG_8245.JPG
https://lh6.googleusercontent.com/-pyx0YjFo0qM/TwTjEoFn7yI/AAAAAAAAGXg/tLnG45F_d1o/s800/IMG_8246.JPG
https://lh3.googleusercontent.com/-pIcOmDhaI3Q/TwTjG_abJ5I/AAAAAAAAGXo/yzdxQ5Ynsp4/s800/IMG_8248.JPG
https://lh6.googleusercontent.com/-b8W84-YtO3E/TwTjJctg9EI/AAAAAAAAGXw/bO6cuaFuc_k/s800/IMG_8250.JPG
https://lh5.googleusercontent.com/-ctFeW1m7UD8/TwTjLrG-zaI/AAAAAAAAGX4/RH9sKFgmm5A/s800/IMG_8252.JPG
https://lh3.googleusercontent.com/-MEyKvZqCBes/TwTjNJram3I/AAAAAAAAGX8/evyBj3Q14rE/s800/IMG_8253.JPG

zed red - your attention to detail on the interior is very good. For a kit that does not have much detail for the interior your work is excellent - these are coming along nicely - John

zed red - your attention to detail on the interior is very good. For a kit that does not have much detail for the interior your work is excellent - these are coming along nicely - John

thank you...

I built the front grids

https://lh5.googleusercontent.com/-MW9oYFeT-IE/Twh2_8jZVJI/AAAAAAAAGZE/SHcxsU7cvII/s800/IMG_8263.JPG

I started painting body...

https://lh5.googleusercontent.com/-56N2fEi3z6Y/TwnPAuRl9GI/AAAAAAAAGaA/16kXIS0S1to/s800/IMG_20120108_112959.jpg

https://lh4.googleusercontent.com/-tndTi5avKgU/Twyv24zQSbI/AAAAAAAAGa0/mJD-l1jerpw/s800/IMG_8273.JPG
https://lh4.googleusercontent.com/-BbTlhXAt_6U/Twyv4JZrk5I/AAAAAAAAGa4/RhTFmSxGXLo/s800/IMG_8274.JPG
https://lh6.googleusercontent.com/-SidKXH6dHf8/Twyv5XpsYMI/AAAAAAAAGa8/9hlYEe52334/s800/IMG_8275.JPG
https://lh5.googleusercontent.com/-tXrDhwHRccE/Twyv6kDWAFI/AAAAAAAAGbA/UDO8GREW528/s800/IMG_8276.JPG

zedred - the paint looks smooth - will both of these cars have the Taisan livery? - I like your coat-hanger painting stands - John

zedred - the paint looks smooth - will both of these cars have the Taisan livery? - I like your coat-hanger painting stands - John

I had a problem with the paint, it was rough... so I used the compound, the paint was smooth but I've exaggerated and I removed the paint from the edges : Pianto: ... I had to repaint on with a final layer of paint very thin and this is the result... it's ok : Grinyes:

both cars will have the livery taisan, one with number 35 and the other with 33, there are some little differences

Yes... it's a coat-hanger, this is my first model car, so I don't have paiting stands, I had to look around :biggrin:

zed red - the paint looks fine - some people put too much attention into the paint - unless it is a pearl or mica or color-shifting - as long as it is opaque and even throughout it will be just fine. After decals are applied and then 2K clear -which I recommend-it will come out perfect. I am a great believer in letting the "painting system" do the work - all this paint polishing just to add a clearcoat is a waste of time provided there are no obvious flaws like crazing-orange peel-blushing etc. That is why I like urethane paints like "Zero" that even dull flat look throughout means you've got it right and just let the 2K clear bring up the depth and gloss factor. You are doing a great job if these are your first cars. I just received my Carrera RSR slot car bodies from Germany so I can build the "Flying Lizard" LeMans Porsches - John

https://lh3.googleusercontent.com/-nDuPF4Pg0pI/Tzu9W2Fo42I/AAAAAAAAGfc/Ir-QJNi-EGQ/s800/IMG_8281.JPG

https://lh4.googleusercontent.com/-HfsYcYy1bkw/Tzu9YrC-uqI/AAAAAAAAGfk/pzM0k46zfvw/s800/IMG_8283.JPG

https://lh3.googleusercontent.com/-M6i6pLPP3cE/Tzu9aB63XLI/AAAAAAAAGfs/pz7mPQaTgqo/s800/IMG_8285.JPG

https://lh5.googleusercontent.com/-ONBnQeVFQ9Y/Tzu9bgUP7VI/AAAAAAAAGf0/VZ9Ler2W8ZY/s800/IMG_8287.JPG

https://lh4.googleusercontent.com/-vQbrYlTeLoc/Tzu9dFGYyCI/AAAAAAAAGf8/NcU2ttElMbA/s800/IMG_8291.JPG

Looks Great!

ianc

Nice work on the decals zedred - looks like the paint and all came out very nice - John

Very nicely done! Great first and second car builds.

:iceslolan the first is finished :icon16:

https://lh6.googleusercontent.com/-B8mtkCtuBRs/T1P6Jy1vFQI/AAAAAAAAGlc/0sOXF6io7j0/s800/IMG_8398.JPG
https://lh4.googleusercontent.com/-tV1fIMNu0dc/T1P6IeW34EI/AAAAAAAAGlU/HSO0nP6ueqg/s800/IMG_8397.JPG
https://lh4.googleusercontent.com/-NVoSxzt5Txs/T1P6HIJAM8I/AAAAAAAAGlM/Q9jo3Qcj1gw/s800/IMG_8395.JPG
https://lh5.googleusercontent.com/-_n1l5pm_nh8/T1P6EZc4S4I/AAAAAAAAGk8/IdZ9H9E0CNk/s800/IMG_8390.JPG
https://lh3.googleusercontent.com/-7D2UtBJPKOs/T1P6Cqzx5OI/AAAAAAAAGk0/7rlhriwEzPk/s800/IMG_8388.JPG
https://lh5.googleusercontent.com/-JLkCwUISKU0/T1P6BJ8JtNI/AAAAAAAAGks/h__M0g4DIzo/s800/IMG_8387.JPG

Looks great!

What brand of seat belts did you use on this?

ianc

zed red - that's beautiful - one of the best GT2's I've seen on the forum - are those the kit wheels? They look great - and the paint and decaling too. - John

Clean and beautiful! Nice work!!

Looks great! Nice work!

Looks great!

What brand of seat belts did you use on this?

ianc

photoetched by Crazy Modeler (http://www.hiroboy.com/catalog/product_info.php?manufacturers_id=10&products_id=433)

seat belt red 2mm by Tuner model Factory (http://www.hobbyeasy.com/en/data/44832.html)

the other Porsche

https://lh6.googleusercontent.com/-C0ux9E6I18Y/T1aWl0fIe7I/AAAAAAAAGl0/cTaUHmn9ZD0/s800/IMG_8400.JPG

https://lh5.googleusercontent.com/-ySbLu05pxEA/T1aWotksDVI/AAAAAAAAGmE/FxW1wexcILY/s912/IMG_8404.JPG+

https://lh6.googleusercontent.com/-zcxuV9wbcoA/T1aWqnFZTLI/AAAAAAAAGmQ/VFSg1yluvU8/s800/IMG_8406.JPG

https://lh6.googleusercontent.com/-el78sMR2RVY/T1aWsLLrTyI/AAAAAAAAGmU/1oezx56j9Vs/s800/IMG_8408.JPG

https://lh6.googleusercontent.com/-xJnQWCikvHQ/T1aWtR5S8xI/AAAAAAAAGmc/_9f4MfUjT_k/s800/IMG_8410.JPG

https://lh3.googleusercontent.com/-P0Jk01ST-Qc/T1aWu6yZXMI/AAAAAAAAGmk/1YwELHFoN5w/s800/IMG_8412.JPG

completed...

https://lh4.googleusercontent.com/-PMObbndA348/T1yw_TfWtiI/AAAAAAAAG6Q/cWG6tirvm-0/s912/IMG_8547.JPG
https://lh6.googleusercontent.com/-Cij5KtnZ4h4/T1yxC4EucAI/AAAAAAAAG6g/Loj_gPbb5Qw/s912/IMG_8551.JPGhttps://lh3.googleusercontent.com/-WnVM4MySU1M/T1yxFPvK4MI/AAAAAAAAG6w/uumuoEKAx1k/s912/IMG_8554.JPGhttps://lh3.googleusercontent.com/-UTH15FjuBGo/T1yxG9ovecI/AAAAAAAAG64/HgMTX8sNmOs/s912/IMG_8556.JPG

Beautiful!

ianc