Civic 87 Tamiya add b16a
hirg
10-08-2011, 08:17 PM
Hi everybody!!
Is my first Tamiya model!!!
Civic 87 hb 1/24, look my progress...
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA050021.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA050023.jpg
i plan add a Engine to this model!!
(The engine from a Civic coupe Revel 1/25)
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA050022.jpg
Some parts extras!!
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA050025.jpg
The engine
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA050027.jpg
out crome with easy off
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA050028.jpg
Some mintutes later
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA050031.jpg
The engine (B16a)
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA050033.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA050034.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA050036.jpg
in the kit mising one line for de bonnet, built...
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA070037.jpg
Presentation...
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA070038.jpg
Work on engine bay
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA070041.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA070043.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA070044.jpg
New fans...
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA070045.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA080046.jpg
Fire wall
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA080047.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA080048.jpg
Test the bunnet, fire wall and engine..
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA080049.jpg
Thanks for see and sorry for my english (is bad, i know)
Is my first Tamiya model!!!
Civic 87 hb 1/24, look my progress...
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA050021.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA050023.jpg
i plan add a Engine to this model!!
(The engine from a Civic coupe Revel 1/25)
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA050022.jpg
Some parts extras!!
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA050025.jpg
The engine
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA050027.jpg
out crome with easy off
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA050028.jpg
Some mintutes later
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA050031.jpg
The engine (B16a)
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA050033.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA050034.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA050036.jpg
in the kit mising one line for de bonnet, built...
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA070037.jpg
Presentation...
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA070038.jpg
Work on engine bay
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA070041.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA070043.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA070044.jpg
New fans...
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA070045.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA080046.jpg
Fire wall
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA080047.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA080048.jpg
Test the bunnet, fire wall and engine..
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA080049.jpg
Thanks for see and sorry for my english (is bad, i know)
Ferrari TR
10-09-2011, 11:41 PM
Very nice.
MidMazar
10-12-2011, 11:34 AM
Nice work, at first i thought you cut out the hood wrong. Keep usposted. The engine is a tiny bit undersized but not as bad as in the fujimi civics or the integras. :thumbsup:
hirg
10-12-2011, 04:34 PM
Nice work, at first i thought you cut out the hood wrong. Keep usposted. The engine is a tiny bit undersized but not as bad as in the fujimi civics or the integras. :thumbsup:
Thank you for watch!
while the engine is a bit small, would be problematic to put the 1 / 24.
Anyway, I think there is any brand that has this engine in 1 / 24
I hope to get away with it!:runaround:
Thank you for watch!
while the engine is a bit small, would be problematic to put the 1 / 24.
Anyway, I think there is any brand that has this engine in 1 / 24
I hope to get away with it!:runaround:
luchoteam
10-12-2011, 06:35 PM
Even though the scale of the engine is not right, it looks great!
You are doing a great project, im going to keep an eye on this one!
You are doing a great project, im going to keep an eye on this one!
hirg
10-13-2011, 09:01 PM
Even though the scale of the engine is not right, it looks great!
You are doing a great project, im going to keep an eye on this one!
Tanks!!!:naughty:
You are doing a great project, im going to keep an eye on this one!
Tanks!!!:naughty:
vekkuli
10-15-2011, 10:30 AM
:eek2:Good Job with Engine Bay and all :eek2:. Just waiting the same Kit to arrive via Mail.
hirg
10-20-2011, 08:06 AM
:eek2:Good Job with Engine Bay and all :eek2:. Just waiting the same Kit to arrive via Mail.
is an excellent kit!, I hope you do something good with it!
some style for your kit? :jerking:
is an excellent kit!, I hope you do something good with it!
some style for your kit? :jerking:
hirg
10-20-2011, 08:30 AM
Hello again!!
I worked on some other details...
The engine.... no done, but work on it!
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA180054.jpg
add a dipstick and ingnition's wires
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA180055.jpg
Work on a battery
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA180056.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA180057.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA180058.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA180059.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA180061.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA180062.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA180063.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA180064.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA180082.jpg
Inside the door is the only complaint for this kit .....
But solve it ...
viewing a photo, where they draw the missing parts
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA180065.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA180066.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA180067.jpg
built with leftover parts
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA180069.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA180070.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA180072.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA180071.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA180073.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA180074.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA180075.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA180077.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA180083.jpg
Well, another complaint is that it brings ..... pedals
Do it!!
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA180085.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA180086.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA180087.jpg
I think the ugliest part of this model is 1:1 shifter
but that will change!
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA190088.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA190089.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA190090.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA190091.jpg
the head of a needle will be new shifter
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA190092.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA190093.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA190094.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA190096.jpg
The interior received its basecoat
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA190097.jpg
thanks for watching, comments are welcome!!!:smokin::smokin::smokin:
I worked on some other details...
The engine.... no done, but work on it!
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA180054.jpg
add a dipstick and ingnition's wires
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA180055.jpg
Work on a battery
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA180056.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA180057.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA180058.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA180059.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA180061.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA180062.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA180063.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA180064.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA180082.jpg
Inside the door is the only complaint for this kit .....
But solve it ...
viewing a photo, where they draw the missing parts
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA180065.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA180066.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA180067.jpg
built with leftover parts
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA180069.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA180070.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA180072.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA180071.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA180073.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA180074.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA180075.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA180077.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA180083.jpg
Well, another complaint is that it brings ..... pedals
Do it!!
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA180085.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA180086.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA180087.jpg
I think the ugliest part of this model is 1:1 shifter
but that will change!
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA190088.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA190089.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA190090.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA190091.jpg
the head of a needle will be new shifter
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA190092.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA190093.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA190094.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA190096.jpg
The interior received its basecoat
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA190097.jpg
thanks for watching, comments are welcome!!!:smokin::smokin::smokin:
vekkuli
10-21-2011, 09:13 AM
is an excellent kit!, I hope you do something good with it!
some style for your kit? :jerking:
At the Moment I won't do anything for It, 'cause someone put a higher Bid on It at some sort of finnish ebay, so I saved my Money :iceslolan.
some style for your kit? :jerking:
At the Moment I won't do anything for It, 'cause someone put a higher Bid on It at some sort of finnish ebay, so I saved my Money :iceslolan.
MidMazar
10-21-2011, 11:46 PM
The small details really add to the overall build. Ecspecially to the older not so detailed curbside kits. What about a turbo for that monster?
hirg
10-22-2011, 08:46 AM
The small details really add to the overall build. Ecspecially to the older not so detailed curbside kits. What about a turbo for that monster?
The details, the little things, which seems not important, are what make a difference!
This car with that engine would not be street turbo .... would have to turn it into a dragster and the idea is a civic jdm B16A swap!
Even if I run through my mind!
Thanks for commenting!:smokin:
The details, the little things, which seems not important, are what make a difference!
This car with that engine would not be street turbo .... would have to turn it into a dragster and the idea is a civic jdm B16A swap!
Even if I run through my mind!
Thanks for commenting!:smokin:
hirg
10-23-2011, 06:44 PM
Hi!!!
First I made templates to carry the role Maskin velvet ..
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA200098.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA200099.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA200101.jpg
With the velvet paper must have patience, to do everything slowly and perspective.
The problem is that does not conform precisely to the surface and therefore must be done by parts ....
In my case utlized this because in my country the Fotki is impossible .... only bring green to simulate grass,
and I have red wine by mistake to the store and I'm the only one I have purchased! : P
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA200102.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA200104.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA200105.jpg
Then proceed to make the grips safety belts ..
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA210106.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA210107.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA210113.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA210115.jpg
Then at the end of the dashboard, which is not a big deal, this car is very simple ... 1985!
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA210108.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA210109.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA210111.jpg
I offer all ...
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA210112.jpg
and so is ready ...
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA210119.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA210120.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA210122.jpg
and photos finally finished!
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA230141.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA230142.jpg
Greetings
Sorry for my bad english.....
First I made templates to carry the role Maskin velvet ..
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA200098.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA200099.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA200101.jpg
With the velvet paper must have patience, to do everything slowly and perspective.
The problem is that does not conform precisely to the surface and therefore must be done by parts ....
In my case utlized this because in my country the Fotki is impossible .... only bring green to simulate grass,
and I have red wine by mistake to the store and I'm the only one I have purchased! : P
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA200102.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA200104.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA200105.jpg
Then proceed to make the grips safety belts ..
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA210106.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA210107.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA210113.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA210115.jpg
Then at the end of the dashboard, which is not a big deal, this car is very simple ... 1985!
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA210108.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA210109.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA210111.jpg
I offer all ...
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA210112.jpg
and so is ready ...
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA210119.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA210120.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA210122.jpg
and photos finally finished!
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA230141.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA230142.jpg
Greetings
Sorry for my bad english.....
bri g
10-24-2011, 11:03 PM
excellent idea! I was thinking of doing this but decided to do a quick build instead :)
hirg
10-25-2011, 08:43 AM
excellent idea! I was thinking of doing this but decided to do a quick build instead :)
your welcome!
your welcome!
kaho
10-25-2011, 01:27 PM
Nice touch on the briefcase in the back!
hirg
10-25-2011, 07:07 PM
Nice touch on the briefcase in the back!
Thanks!!:smokin:
Thanks!!:smokin:
jaxson
10-27-2011, 12:53 AM
Wow...great build. Im am going to follow this!
hirg
10-28-2011, 04:48 PM
Well
i made the rear wing. From a Civic hb Revel 1/25
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA230143.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA230144.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA230145.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA230146.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA230147.jpg
The paint and clear work is done
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA260148.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA260149.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA260151.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA260152.jpg
Chassis (its a 24 years old car!)
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA260153.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA260152.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA260154.jpg
Strips paint in black
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA280157.jpg
The CF Wing is done!
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA280158.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA280159.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA280160.jpg
The CF Bunnet are finish to
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA280161.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA280162.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA280163.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA280164.jpg
I need finish the suspension work....
i made the rear wing. From a Civic hb Revel 1/25
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA230143.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA230144.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA230145.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA230146.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA230147.jpg
The paint and clear work is done
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA260148.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA260149.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA260151.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA260152.jpg
Chassis (its a 24 years old car!)
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA260153.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA260152.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA260154.jpg
Strips paint in black
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA280157.jpg
The CF Wing is done!
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA280158.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA280159.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA280160.jpg
The CF Bunnet are finish to
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA280161.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA280162.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA280163.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA280164.jpg
I need finish the suspension work....
Wolf95
11-05-2011, 11:32 PM
I'm putting a b16 in a 99 civic right now. (real car, not a model) That's a sturdy motor right there!!
Great job so far. keep up the good work!
Great job so far. keep up the good work!
hirg
11-06-2011, 08:22 AM
I'm putting a b16 in a 99 civic right now. (real car, not a model) That's a sturdy motor right there!!
Great job so far. keep up the good work!
Recently (1 month ago) sold my Civic type R EK9 :frown: .... I think a big mistake
But maybe later buy something fun.
Thanks for appreciating this little work!
Great job so far. keep up the good work!
Recently (1 month ago) sold my Civic type R EK9 :frown: .... I think a big mistake
But maybe later buy something fun.
Thanks for appreciating this little work!
hirg
11-12-2011, 09:36 PM
Well, i work in a exhaust system!
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA280166.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA290167.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA290173.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA290175.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA290176.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA290177.jpg
i need make a racing catalitic... and the candy is great solution in middle of the nigth!
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA290178.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA290180.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA290181.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA290182.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA290184.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA290186.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA290187.jpg
Done!
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA290188.jpg
Done engine!
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PB090192.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PB100194.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PB100195.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PB100196.jpg
90% done
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PB100197.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PB100198.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PB100200.jpg
and..... lose the cf for my bunnet...... I don't know what happen...
Same Clear, every same and the final layer reaction F**&()*%$$()($%#$$##$@#$)))
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PB100201.jpg
Need repaint (and i don't have more cf decals)......
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA280166.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA290167.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA290173.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA290175.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA290176.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA290177.jpg
i need make a racing catalitic... and the candy is great solution in middle of the nigth!
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA290178.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA290180.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA290181.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA290182.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA290184.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA290186.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA290187.jpg
Done!
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PA290188.jpg
Done engine!
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PB090192.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PB100194.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PB100195.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PB100196.jpg
90% done
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PB100197.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PB100198.jpg
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PB100200.jpg
and..... lose the cf for my bunnet...... I don't know what happen...
Same Clear, every same and the final layer reaction F**&()*%$$()($%#$$##$@#$)))
http://i199.photobucket.com/albums/aa22/hectorrosario2002/civic%2087/PB100201.jpg
Need repaint (and i don't have more cf decals)......
hirg
11-13-2011, 08:18 AM
Automotive Network, Inc., Copyright ©2026
