Difficulty installing rear spark plugs
acarp
09-26-2011, 03:57 PM
I have a 1996 Continental V-8. The front 4 spark were difficult to install but I was able to do it. I can't get the rear 4 installed. bigjdog had posted on another thread that this was a pain.
Any suggestions?
Please don't post a different forum link. I've looked there.
Thanks
Any suggestions?
Please don't post a different forum link. I've looked there.
Thanks
Towncar
10-02-2011, 10:29 AM
I have a 1996 Continental V-8. The front 4 spark were difficult to install but I was able to do it. I can't get the rear 4 installed. bigjdog had posted on another thread that this was a pain.
Any suggestions?
Please don't post a different forum link. I've looked there.
Thanks
Lemme know if you'd like a copy of the 1996 FSM, PM me.
Any suggestions?
Please don't post a different forum link. I've looked there.
Thanks
Lemme know if you'd like a copy of the 1996 FSM, PM me.
pmpmrs@amigo.net
11-29-2011, 05:32 PM
I have a 1996 Continental V-8. The front 4 spark were difficult to install but I was able to do it. I can't get the rear 4 installed. bigjdog had posted on another thread that this was a pain.
Any suggestions?
Please don't post a different forum link. I've looked there.
Thanks
Acarp,
On my '95 I found it easy if you pull the fuel rail first. Not a big job, but don't lose the "O" rings for the injectors. The plug wire ends should be lubed w/ starter fluid just before you try to twist them in order to pull them out.
Mike
:runaround::runaround::runaround:
Any suggestions?
Please don't post a different forum link. I've looked there.
Thanks
Acarp,
On my '95 I found it easy if you pull the fuel rail first. Not a big job, but don't lose the "O" rings for the injectors. The plug wire ends should be lubed w/ starter fluid just before you try to twist them in order to pull them out.
Mike
:runaround::runaround::runaround:
Automotive Network, Inc., Copyright ©2025