1995 Taurus front hub/bearing replacement...Anyone with experience
Tomb stone
09-12-2011, 12:43 AM
How difficult is it? Will the hub/knuckle assembly easily release from the CV shaft once the shaft nut is pulled, or will I need a special puller?? I looks like I’ll have to remove the knuckle and have a new hub pressed in??? I have a press, so are there any special instructions??? Parts??? Tools???
Thanks,
Tom
Thanks,
Tom
papoutp
09-18-2011, 11:26 PM
It's not a difficult job.
To get to the hub, you have to remove the CV shaft. You won't need a puller if you remove the tie rod from the knuckle and the sway bar from the strut.
To get to the hub, you have to remove the CV shaft. You won't need a puller if you remove the tie rod from the knuckle and the sway bar from the strut.
Tomb stone
09-19-2011, 04:18 PM
Did you have a machine shop press the new bearing into the hub?
Automotive Network, Inc., Copyright ©2026