Started business, check it out.

Hey Guys and Gals. Just started my Graphics business called Stickertime Graphics. You can find me on ebay with name stickertimegraphics or my facebook at http://www.facebook.com/#!/stickertime.graphics I can cut any sticker you want up to 27in. Check us out. :biggrin:

Good luck with it!

Thanx igor. If any1 has some cool ideas for stickers or what to put on a license plate, feel free to give your ideas.

Good luck. I've been cutting vinyl for a while now. Decent market for it.

Member discounts? :naughty:

Member discounts? :naughty:

Unless he's a vendor, can't do any selling on AF

But you know how to get discounts from me.

congrats bud hope it goes really well!!

Member discounts? :naughty:
Ya buy 2 get 1 free. :)


Hey dave who do you get your vinyl from? Been getting everything from Signwarehouse.com Get points when buying from them so you have discounts when buying from them. Just started about a month ago or so and made some pretty good sales. Just tryin to boost my sales up. Any ideas?

Ya buy 2 get 1 free. :)


Hey dave who do you get your vinyl from? Been getting everything from Signwarehouse.com Get points when buying from them so you have discounts when buying from them. Just started about a month ago or so and made some pretty good sales. Just tryin to boost my sales up. Any ideas?

I get all mine though my work. So I get big discounts on all my 75ft rolls of vinyl and tape. Not sure what equipment you're working with.

Best way to boost sales is with a website. I'm a web designer... just sayin

I get all mine though my work. So I get big discounts on all my 75ft rolls of vinyl and tape. Not sure what equipment you're working with.

Best way to boost sales is with a website. I'm a web designer... just sayin

Ya been thinking about getting a website going. I know alittle about building a site, but not good enough for a biz.
IM using the R-series vinyl express 31in. Hoping to upgrade to the Q series soon.

This is one of the cutters I use
http://i59.photobucket.com/albums/g291/david-b/0114081453b.jpg
Roland RX300 I believe. Beastly. The speed on this thing is amazing.

Nice. My speed only hits 6.00 and pressure hits 5.00g. Guess IM runny my vinyl backwards cause I got it running under cutting to were the cuts come out the front. Guess it doesn't matter? Haven't had any problems yet. Here is mine. http://i914.photobucket.com/albums/ac348/420Aspeed/SDC11737.jpg
Can you do me a huge favor dave? Can you take a good close up of your blade holder so I can see how far you have it from cutter? This damn book they sent I think is wrong cause times it will cut right through the vinyl paper and times it hardy cuts to were it is very very hard to weed. Mine is also a plotter, which I haven't even open my plotter pin yet..hehe

Can you do a 1978 Trans AM hood Eagle?

Can you do a 1978 Trans AM hood Eagle?
Yup I can. Just don't have the graphic for it.

Speed on mine goes up to 85cm/s and force is 350gf. Thing will cut nearly anything as long as the blade and penatrate. Have made stencils out of cardboard, clear plastic, vinyl cutting... done a lot with it. Great machine. Was $3500 I believe when I bought it.

Yours may not be backwards... seen them load different directions, but I would check in the manual. My cables all stick out the back, so technically can't load mine that way. Also, the rolls have to sit between the rollers, not going threw them. Look at mine to see what I mean. You will wear out the rollers on the cutter very quickly the way you have it.

Speed on mine goes up to 85cm/s and force is 350gf. Thing will cut nearly anything as long as the blade and penatrate. Have made stencils out of cardboard, clear plastic, vinyl cutting... done a lot with it. Great machine. Was $3500 I believe when I bought it.

Yours may not be backwards... seen them load different directions, but I would check in the manual. My cables all stick out the back, so technically can't load mine that way. Also, the rolls have to sit between the rollers, not going threw them. Look at mine to see what I mean. You will wear out the rollers on the cutter very quickly the way you have it.
Ya I saw how you did it and tried it on a few cuts I had to do. It pulles the vinyl alot better. Paid $250.00 for mine and have made way more than I paid for it. So got money back:)

Ya I saw how you did it and tried it on a few cuts I had to do. It pulles the vinyl alot better. Paid $250.00 for mine and have made way more than I paid for it. So got money back:)

Thanks all that matters. Not a bad unit for that price. Good find.

I took pics of the cutter for you but forgot to upload them yesterday. I'll try to do it later tonight. The blade is adjustable like a 1/2in or so. I'll get them up later.

Thanks all that matters. Not a bad unit for that price. Good find.

I took pics of the cutter for you but forgot to upload them yesterday. I'll try to do it later tonight. The blade is adjustable like a 1/2in or so. I'll get them up later.
K thanks.