Shift lock actuator plug diagram

Hi, new here.
Trouble with my 2000 Grand Prix
It took my console apart because of the notorious not being able to shift out of park problem. And just as so many have stated I had broken wires at the plug for my shift lock actuator. The wires are broken flush with the plug so there is no plastic colored wire and I have no idea where these wires go.
The wires that are broke are pink,org/black, and purple/white.
The top of the plug "clip side has two wires still attached one is pink the other is green/white and they are beside each other.
On the bottom holes that are open they are labeled A B C if thats any help.

Any info would be greatly appreciated!

Thanks!

I found a used one.
But for those of you that have this problem here's how the wires should be going into the plug.
On top "meaning were the clip is that keeps the plug in place.

empty/green and white/pink

bottom

C purple and white/B pink/A orange and black

this would be the view looking at the rear of the plug where the wires innter it to be crimped.

hope this can help someone someday!