Our Community is 940,000 Strong. Join Us.


water pump replacement


slayer5
02-28-2011, 11:40 AM
what is the best way to gain access to the water pump ? I have done it on my 94' 3 cylinder, but now my wifes 2000' metro 4 cylinder needs water pump. Its alot tighter in the 2000' and was needing advice like take fender off or something like that .

Woodie83
03-01-2011, 05:02 AM
You need to do a Timing Belt replacement plus one or two more steps for the water pump. A lot of the work will be done through the wheelwell, it's necessary on a four cylinder to remove the passenger side motor mount and drop the engine down a couple of inches for good clearance.

http://www.teamswift.net/viewtopic.php?f=2&t=26588

http://geometroforum.com/topic/2232748/

slayer5
03-13-2011, 06:22 PM
Yea the passenger side motor mount I removed, and used a floor jack to raise or lower engine. Pump is on and all is fine. Thanks.....

Add your comment to this topic!