4r55E Rebuild Trouble
urnuts73
12-28-2010, 04:09 PM
Rebuilt the 4r55E
Transmition slips in drive and 1
2 engages but drags
When adjusting intermediate band this gets Drive and 1, but 2 locks and drags like the Emergency brake is on.
Ok so I pulled the valve body and I found that the upper gasket had shifted when I installed the valve body.
Could this cause my problems
OK Im wondering were I can find a valve body seperator plate W/bonded gaskets.
I am new at rebuilding transmitions and any help would be greatly appreciated.
Transmition slips in drive and 1
2 engages but drags
When adjusting intermediate band this gets Drive and 1, but 2 locks and drags like the Emergency brake is on.
Ok so I pulled the valve body and I found that the upper gasket had shifted when I installed the valve body.
Could this cause my problems
OK Im wondering were I can find a valve body seperator plate W/bonded gaskets.
I am new at rebuilding transmitions and any help would be greatly appreciated.
Automotive Network, Inc., Copyright ©2025