94 Mustang Convertible - Seat Belt Alarm Malfunctioning
pchangel
12-12-2010, 12:35 AM
Recently the seat belt alarm and the fasten seat belt image on the dash board of my daughters 1994 Convertible started coming back on after she is driving down the road. It basically starts out blinking and dinging as usual when she first cranks the car up, she buckles the seatbelt and five or six seconds later, its does the same thing again, while the seat belt is buckled. I drove the car this morning and it did the same thing with me at least four time before it stopped messing up. Has anyone had this problem before? The light and chime just comes back on for no aparent reason its seems. We've checked and double checked to make sure the seat belt was latching well and it seems fine. Could this be a fuse going bad maybe? Thanks in advance for any respones!
Angie
Angie
timjackie2001
12-12-2010, 02:14 AM
We had the same problem on my sons 95 convertible. Never could figure out exactly what was causing it, but we did find the box in the dash behind the stereo that makes the dinging. There are 2 plugs on it. Coming from the drivers floorboard, unplug the one closest to thefirewall, and the light will go off and the dinging wll stop.
I know this won't solve the problem, but it will make it a little less annoying until you can get it fixed
I know this won't solve the problem, but it will make it a little less annoying until you can get it fixed
Automotive Network, Inc., Copyright ©2025