Fuel cell
tccoupe
10-12-2010, 05:16 PM
Does anyone have a good source for the bladder and foam for the fuel safe cell in a series car?
Thanks
bruce
Thanks
bruce
boothkc
10-12-2010, 06:46 PM
You can get it directly from Fuel Safe or some of the race supply shops (eg Pegasus). I think it is about $250 and if you give them the model number you can get the right amount. It comes in several chunks and you can cut it up with a bread knife which makes it easier to drop into the cell after you get the lid off...else you have to drop the cell which is a PIA with the body in place.
Not sure if it is true, but I heard the foam is cut from chunks that are used in 747 wing tanks.
Kevin
Not sure if it is true, but I heard the foam is cut from chunks that are used in 747 wing tanks.
Kevin
feqrags
10-12-2010, 08:29 PM
Bruce,
Use the yellow open foam, not the black (drag race foam-very dense-holes fuel too well) --maybe or maybe-not a problem with fuel delivery..but thats how i was advised.. -Bill -electric knife if nooo gas around works well
Use the yellow open foam, not the black (drag race foam-very dense-holes fuel too well) --maybe or maybe-not a problem with fuel delivery..but thats how i was advised.. -Bill -electric knife if nooo gas around works well
Panoz26
10-13-2010, 07:52 AM
agree with Kevin - Fuel Safe!
Automotive Network, Inc., Copyright ©2026
