Wiring for swap question

A friend of mine is working on a '96 civic DX and is putting in a 89-91 B16a; he has a PR3J ECU. Does anyone know a site that could help out with the wiring; especially the ODB conversion? This would greatly help me out if anyone has any info I can pass along.

Skunk 2 Has a ECU Conversion Harness. Converts OBDII to OBDI. http://www.skunk2.com/start.htm Maybe this will help you.

check out the tech pages at www.hasport.com for the wiring changes needed.

Wouldn't a 89-91 B16a be an OBD 0 engine? If so that Skunk2 harness isn't going to work.

yeah but the motor is going into a 96 civic, tell your boy he is better off getting a b16a3 from the 99si, that way he wont have to worry about swapping the obd wires around.

b16A3 is the del sol vtec engine, the A2 is the 99+SI

and am i correct about this: the A2 is OBD2 and the A3 is OBD1?

Originally posted by 94tegRS

and am i correct about this: the A2 is OBD2 and the A3 is OBD1?

Correct ;)

my bust on the a3, a2 thing, but ya'll know what i meant.

Thanks everyone for the help so far, unfortunately not what I'm looking for exactly. I really need a site that tells how to do the wiring by myself (in this case my friend).
But yes I realize how odd it is that he got that engine, but he says he wanted more hp but didn't have a lot of $ to spend; but I think this non-expensive short cut is going to end up being a lot more $ and time to do than even a 92-95 b16a.

seems that way.