Swap-able Radiator ?
el_loco_civic
05-08-2003, 11:26 PM
Is there a Swap-able radiator for the sedans ? i need one that is Bout maybe, 6 inches or so less in width. Everything else like thickness and height is fine. But My projectors stick inward too much, and i have to modify radiator to fit them properly, means i have to cut corners off bout 3 inches or so deep. But then i'd have to saughter each lil ridge together, and i'm too lazy for somin like that. Being Mexican doesnt mean i like work.. :bandit: :rolleyes: :flipa:
But any help iz appreciated !
But any help iz appreciated !
mellowboy
05-09-2003, 01:35 AM
U can get a 6th gen civic radiator. Those things are pretty small but u have to customize it to fit it right. I can't tell you how since i never did it but i did see a crx with a 6th gen radiator.
el_loco_civic
05-09-2003, 06:10 AM
-Alright thanks Mellowboy !
I'll try to get to a junkyard and check that out. Thanks again.:D
I'll try to get to a junkyard and check that out. Thanks again.:D
marked001
05-09-2003, 07:54 AM
I dont know if the 6th gen rad is too tall or not..I know the 5th gen is... the neon radiator is a half-size rad and fits nicely...my buddy just did a write-up on this..lemme see if I can get/find the link..
*edit: found it... http://www.geocities.com/neonradiator/neon.html
*edit: found it... http://www.geocities.com/neonradiator/neon.html
91civicDXdude
05-09-2003, 12:25 PM
i know a 90-93 teg radiator will bolt right into a 88-91 hatchie... dont know about the sedans though..
marked001
05-09-2003, 01:12 PM
..I"m pretty sure that tegs use full-size rads...dont they?
mellowboy
05-09-2003, 01:36 PM
Originally posted by marked001
..I"m pretty sure that tegs use full-size rads...dont they?
Yes they do.
..I"m pretty sure that tegs use full-size rads...dont they?
Yes they do.
gunnmen01
05-09-2003, 02:00 PM
do the 90-93 tegs use a radiator with more core's? otherwise its not worth the swap...
gunnmen01
gunnmen01
ev0lution7
05-10-2003, 10:34 AM
yes the use a double size rad than our civics i'm thinking of going that route to keep my turbo'd ZC k00l (when i install my turbo) just cuz it looks like a BEEFIER rad :)
EF You
05-10-2003, 01:12 PM
STD hatches come with a slightly shorter radiator, they arent half size,but they are about 4 inches shorter than the Si radiators. try that one, it might work. i have three of them if you need one.
mellowboy
05-10-2003, 01:21 PM
Originally posted by incucivic
STD hatches come with a slightly shorter radiator, they arent half size,but they are about 4 inches shorter than the Si radiators. try that one, it might work. i have three of them if you need one.
Yeh same goes for the HF. I forgot abut that.
STD hatches come with a slightly shorter radiator, they arent half size,but they are about 4 inches shorter than the Si radiators. try that one, it might work. i have three of them if you need one.
Yeh same goes for the HF. I forgot abut that.
91civicDXdude
05-10-2003, 03:18 PM
my brother has a 91 STD that the radiator cracked all to pieces so he put the 90 teg one in. bolts right in no problems.
el_loco_civic
05-10-2003, 09:12 PM
Originally posted by incucivic
STD hatches come with a slightly shorter radiator, they arent half size,but they are about 4 inches shorter than the Si radiators. try that one, it might work. i have three of them if you need one.
Alright, that sounds pretty good. Thats w/ AC too ? And how much would you want for 1 ?
STD hatches come with a slightly shorter radiator, they arent half size,but they are about 4 inches shorter than the Si radiators. try that one, it might work. i have three of them if you need one.
Alright, that sounds pretty good. Thats w/ AC too ? And how much would you want for 1 ?
EF You
05-10-2003, 09:24 PM
yes. they have A/C fans on them. 10 bucks plus shipping and you can have one, fans and all.
Automotive Network, Inc., Copyright ©2025