broken rear defroster 1999 Ford Expedition

Does anyone know how to fix the broken connection tabs where the power cord attaches on rear window defroster on my 1999 Ford Expedition ? Have the repairs been successful ?

This should help you. Easy fix!
http://www.frostfighter.com/
Franco

Thanks Franco! I was going to try and solder mine back on, but their silver epoxy looks like a better way to go.

is it possible to solder it back on? that repair kit is like 20 bucks!

I got the kit at Advance Auto Parts for rear defroster repair. It not only is for repairing a scratched off line in the defroster grid, but it also includes epoxy for reattaching one of the tabs. My '05 expy had both knocked off and it wasn't enough epoxy in the kit for both, so I bought a tube of two part epoxy and used it on one of them. Don't do that. After two months of use the two part epoxy must not have been able to handle the heat/cold cycles and that tab came off. There was more than enough liquid copper in the kit to paint over both tabs to give them full contact again with the grid. I think that kit was around $9 US. Soldering isn't really an option. The heat will just cause the copper on the window to shrink away from the tab and that is what you are trying to solder to. The tabs were originally glued to the glass and the copper coating for the grid was then applied over the top, the tabs were not soldered to the grid.

I have an 01' expedition and i also bought a kit from advance auto parts and it fell off within 1 week when i went on vacation to virginia. so i let it go till a week ago and bought another kit and 1 week later it fell off again. is there anything else that can fix this other than replacing the whole thing? someone said there is some heatless soilder that i could try?