Yoke
Panoz26
06-12-2010, 08:14 AM
Does anyone know if the Yoke on our cars is a 1350?
I found this and it looks correct:
Moroso #710-85080
Heavy Duty U-Joint Straps
Ford 9" with 1350 yoke
Thanks!
I found this and it looks correct:
Moroso #710-85080
Heavy Duty U-Joint Straps
Ford 9" with 1350 yoke
Thanks!
NZGTRA17
06-13-2010, 08:29 PM
Does anyone know if the Yoke on our cars is a 1350?
I found this and it looks correct:
Moroso #710-85080
Heavy Duty U-Joint Straps
Ford 9" with 1350 yoke
Thanks!
Devin, I have had a car with 1350 yokes and they looked bigger than whats on our cars (assuming that they are all the same). I suspect ours are 1330 yokes. Best bet would be to take the shaft to a driveshaft shop and have them confirm (if you can find any dimensional info on the net).
Kel.
I found this and it looks correct:
Moroso #710-85080
Heavy Duty U-Joint Straps
Ford 9" with 1350 yoke
Thanks!
Devin, I have had a car with 1350 yokes and they looked bigger than whats on our cars (assuming that they are all the same). I suspect ours are 1330 yokes. Best bet would be to take the shaft to a driveshaft shop and have them confirm (if you can find any dimensional info on the net).
Kel.
panozracing
06-13-2010, 08:39 PM
Call JOSH/BRANDON @ Panoz Parts Dept ... Great guy ; Great Help !!! 770.867.4796
The p/n for GTS u-joints is: Neapco 2-0053.
The p/n for GTS u-joints is: Neapco 2-0053.
Panoz26
06-14-2010, 07:57 AM
Call JOSH/BRANDON @ Panoz Parts Dept ... Great guy ; Great Help !!! 770.867.4796
The p/n for GTS u-joints is: Neapco 2-0053.
Yea, Brandon is on speed dial these days, what I am actually looking for are the straps.
The p/n for GTS u-joints is: Neapco 2-0053.
Yea, Brandon is on speed dial these days, what I am actually looking for are the straps.
panozracing
06-14-2010, 09:10 AM
right i read that somewhere...duhhhh
call PAD....I have a new set in the toter and will try and remember to look. Napa sells them. Just take the old ones to NAPA and match them up.
call PAD....I have a new set in the toter and will try and remember to look. Napa sells them. Just take the old ones to NAPA and match them up.
Panoz26
06-14-2010, 06:41 PM
indeed - we or atleast I - have a 1330 Yoke and found the appropriate u-bolt at Napa - all is good, back to the dyno on Wednesday!
eric1h
06-15-2010, 01:47 PM
Brian, we have different U-joints than the GTS, how do i know? I ordered some based on the PN you posted in a prior thread and they were too big! :-D
Anyone need a couple GTS u joints?
Anyone need a couple GTS u joints?
panozracing
06-15-2010, 07:25 PM
sorry about that....
one of my cars actually has an even larger one and has some sweet billet end on the pumpkin that uses bolt on caps to hold the u-joint so u dont need the parts from napa. I think they are an upgrade from TEX racing.
one of my cars actually has an even larger one and has some sweet billet end on the pumpkin that uses bolt on caps to hold the u-joint so u dont need the parts from napa. I think they are an upgrade from TEX racing.
David Eastman
06-15-2010, 08:52 PM
Devin, Going to the Dyno on Wednesday I sure hope you are going to be ready for CMP on Friday.
David
David
Panoz26
06-16-2010, 02:43 PM
David - I am back from the dyno and ready as hell for CMP.
Thanks for the concern, much appreciated.
Thanks for the concern, much appreciated.
Cobrafang
06-16-2010, 03:12 PM
David - I am back from the dyno and ready as hell for CMP.
Thanks for the concern, much appreciated.
Numbers?
Thanks for the concern, much appreciated.
Numbers?
eric1h
06-17-2010, 07:04 AM
Devin, Going to the Dyno on Wednesday I sure hope you are going to be ready for CMP on Friday.
David
David, I/we will be at the track tonight grilling out, if you get in in time stop over for a brat, beer or burger!
David
David, I/we will be at the track tonight grilling out, if you get in in time stop over for a brat, beer or burger!
Automotive Network, Inc., Copyright ©2026