What plans do you have for your car?

My future plans are to have the sickest, totally original, and cleanest 4g4d in the world!!!
It's gonna take alot of work but im looking forward to the respect and props I'll get when My 14 yr. old civic whoops up on ur car! haha....j/k.
I wanna drop the D16Z6 in their myself w/ basic bolt ons Im looking at 150 HP and vtec in a 4g4d, I'll kick basically any cars ass that has up to 170 or so hp because my car is so light. What would u do if you heard an 89 civic 4 door with vtec? hahaha......oops sorry...getting carried away. I do all my own work so right now I'm shaving the moldings on the doors and the center taillight piece, then I'll get my body kit on and mold it in. I also plan to make my 4 dr into a 2 dr...Im gonna shave the rear handles and fiberglass the door shut, then on the inside, i'll remove the door panels and all the wiring and then i'll use sheet metal to make a new door panel. Then I'll cover it in leather so that it's just flat and smooth in the back. But, I'll still be able to roll down the windows from the front! (i got power windows). So it will be a 2 door but all the windows will roll down....cool huh? Then I'll sand my car down and prime it and throw some new silver on there....I think it will make for a sick look. What about you?

I dunno if its such a great plan to shave the rear doors but whatever floats your boat ... as for me, hopefully I can get my new header on saturday before the livermore meet, and next on the list is MPFI'in this bad boy.

If i decided to keep my car. I'm gonna swap out my b16 short block for a gsr or type r. Then p&p the head with skunk2 valvetrain with there stage 2 cams. Skunk2 manifold.Build up the bottom and get it resleeved to 85 mm (2.0) and go with 12:1 cr along with eagle rods. Polish the crank and get moroso oil pan. Well i still gotta get the basic bolt ons. Hopefully i can get it this done by mid summer.:)

To each his own but I think you should reconsider the silver and yellow paint scheme. They just don't mix on any level.

Yellow is how g's roll.

http://www.imagestation.com/picture/sraid38/p2126e3cf3f9efd1afdc2b2c9ec820ea5/fd15f6b2.jpg

To each his own but I think you should reconsider the silver and yellow paint scheme. They just don't mix on any level.

well...I was gonna paint my car all yellow, but Nick (the 4g4d store dude already did that and I don't wanna be considered a biter. Also...I really wanted to do black and yellow but I'm trying to avoid the bumble bee jokes. Black and yellow are the two MOST opposite colors on the spectrum. They stand out more than black and white...that's why I wanted black and yellow but the silver I want is really nice...it turns blue in certain angles of the sun and with the metal flakes in it. But, im not changing the yellow...its my favorite color and it stands out alot so I like it.

- Im also trying to get my car to the point where every 4g4d site will have my car in the 4g4d of the month. This summer all of this is going on or being done without a doubt :
--Xtreme Front, sides, (maybe back, but i might just make own outta stock bumper so its more smooth like new Xtreme fronts)
--Im thinkin between Saleen Universal, and Snyper wings. But i seen alot of saleen wings around out of the blue all a sudden.
-- F.B.S.S Air bag suspension ( front back side to side ) *corners and pancakes :D
-- Tinted Red Windows, most likely see thru, but metallic maybe
-- Finished Prelude conversion w/tail lights
-- Finished Accord 90-93 Accord Head light Conversion
-- Mold Body kit to car
-- Mirrors (* any kind w/blinkerz *)
-- Shave molding, emblems (thinkin bout antenna, and buying that kit)
-- some kind of New tires, an adapter for my rimz
-- Then Prep car inside and out for paint job ( 3 shades darker than candy apple red, with a TRI-Coat Metallic finish, and blending w/light angles Black designs out lined in White.
-- And make my custom sub box w/2 windows ;)
-- Extra money from selling at the Flea Market, doing Interior upholstery. (Red, Black, White) on Seats, Dash, Ceiling.

Those are already planned out, and got prices and everything. Shipping and handling estimate is also included in this. Im gettin all the money from sellin at flea market, and Construction ! Cuz im not paying insurance, or bills, or nothing but snacks, and mags, and i can just stop buyin them - i cant wait til summer starts so i can start my summer job !:cool:

1. Just ordered my rims, should be here friday.. 17' 8 spoke.
2.Body kit, either invader, blitz or the streetfighter front.
3 paint, black, nice clean and aggressive looking.

Originally posted by bambam89lx


Also...I really wanted to do black and yellow but I'm trying to avoid the bumble bee jokes.

Too bad my boy (fishcat37) went through this. He named his car bumble bee lol:p

Originally posted by Melt
Yellow is how g's roll.


Too bad u aint a g;)

Originally posted by mellowboy


Too bad my boy (fishcat37) went through this. He named his car bumble bee lol:p

fishcat's car is tight

Originally posted by Melt


fishcat's car is tight

Yeh hes gettin rid of it. Right now hes over hauling all the stuff to his new rex:)

Plans for the car huh - lets see:

Racing Seats
Projector Headlights
Shaved Mouldings
Shaved Antenna
Shaved Center Tail Light
Shave Sideskirts into car
Dual Exhaust System
Two more screens in the back of the front seats
D16A6 Turbo Project Started
Truck Stereo System box Redone
Shaved Emblems
New Carpet Kit
Headliner Re-Vinyled
Full R-1 Guages (7 color change) Custom installed into dash
New Steering Wheel
Integra Console
New Fiber Glass Hood
Z3 Fenders
Rear Disc Brake Conversion
S2000 Tail Light Conversion

I think there are a few things that I left out, but you get the jist of what I'm doing.

heh tons i'll just say the motor work im going to do LSVtec with SC blueprint and all the goodies (cams header pullies etc) and swap my piping to 2 1/2 for the F/I now you want to know the rest i bet.

damn dude get rid of your signature, its annoying to have to scroll down that much

Originally posted by el_loco_civic
--Im thinkin between Saleen Universal, and Snyper wings. But i seen alot of saleen wings around out of the blue all a sudden.


What wings you think would look better on a Sedan 91 ?:confused:? Not gonna be for racing or to help ground me or anything, just for the looks. Both are Universal. I know its up to what i like, but i wanted to know if any one of these look just like crap on a sedan. Thanks - sorry to post whore this, but its deciding my future plans right ? ;)

Snyper : http://files.automotiveforums.com/uploads/791104cc_sniper.jpg

Saleen : http://files.automotiveforums.com/uploads/287891SaleenWing.jpg

thanks again -!

D16y8 currently sitting in pieces in my garage... Just replacing all the gaskets right now, also got a new header for it and powder-coated valve cover.

MSD 6A ignition which is half-way installed in my car right now.

Neuspeed Front anti-sway bar which has been sitting in my basement for about a year now.

Neuspeed Rear anti-sway bar...

Shaved rear-wiper. Was supposed to be done this week but ran out of $$.

Custom fiberglass sub pod for two 10" Kicker solobarics. Started it last summer, haven't finished it yet.

Amp rack and MDF floor for where the back-seat used to be. Need to relocate the rear mounts for my 3-point harnesses in order to do this though.

New stereo. Mine got jacked up when someone tried to steal it...

Painting my sedan door-handles and window frames. Bringing the car to the shop tomorrow...

Sparco racer pedals... had them for about a year, need to figure out a way to mount them to the pedals... I'm going to see if the body-shop will weld them on when I go in tomorrow.

Yellow Momo shift-boot and e-brake boot.

Rear-looking pinhole camera with reverse-imaging processor so I can use an LCD screen as a rear-view mirror...

LCD screen as mentioned above.

PS2.

Power windows

Tokico blue shocks.

Turbo

Diamond plate flooring

Air cylindars?

Rear disc brake conversion

RSX tail-light conversion... (?)

um..... I'm sure I missed a few things but oh well...

i plan to turn my 4th gen into a race car. either ls or gsr fully built, on 15psi till i turn it into a race car, then idk what 30psi or soemthing like that.

I think I'll start simple, like getting the car on the road.

New hood

Paint it

Boost it

Eat a 5.0

Drive it till it dies.

Im not going to spend all my money on the car maybe after I get a little better than 6.30 an hr job I might sink some more cash into it.

My plans for now, after I get the b16 to run 12's (which won't take too long), is to build up a d16z6/y8, 220hp, NA, 11,000rpm redline. Then of course, I'm still workin' on my 5th gen Civic front end conversion which should be done this summer, and then I just gotta get the car repainted, new wheels, and tint. Then I'll be done with the CRX and I can move on to something with RWD...I'm thinkin' R33 Spec. V:cool:

Originally posted by XxLuckyLisaxX
damn dude get rid of your signature, its annoying to have to scroll down that much

SOOOOOOOOOOOOOOOOOOOOOOOOO TRUUUUUUUUUUUUUUUUUEEEEE!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!:rolleyes:

haha ... everytime he posts I end up reading it to see if there is something I missed!

Nothing in the sig is even worth listing. DAMN!!!

Originally posted by ci5ic
D16y8 currently sitting in pieces in my garage... Just replacing all the gaskets right now, also got a new header for it and powder-coated valve cover.

MSD 6A ignition which is half-way installed in my car right now.

Neuspeed Front anti-sway bar which has been sitting in my basement for about a year now.

Neuspeed Rear anti-sway bar...

Shaved rear-wiper. Was supposed to be done this week but ran out of $$.

Custom fiberglass sub pod for two 10" Kicker solobarics. Started it last summer, haven't finished it yet.

Amp rack and MDF floor for where the back-seat used to be. Need to relocate the rear mounts for my 3-point harnesses in order to do this though.

New stereo. Mine got jacked up when someone tried to steal it...

Painting my sedan door-handles and window frames. Bringing the car to the shop tomorrow...

Sparco racer pedals... had them for about a year, need to figure out a way to mount them to the pedals... I'm going to see if the body-shop will weld them on when I go in tomorrow.

Yellow Momo shift-boot and e-brake boot.

Rear-looking pinhole camera with reverse-imaging processor so I can use an LCD screen as a rear-view mirror...

LCD screen as mentioned above.

PS2.

Power windows

Tokico blue shocks.

Turbo

Diamond plate flooring

Air cylindars?

Rear disc brake conversion

RSX tail-light conversion... (?)

um..... I'm sure I missed a few things but oh well...

bloody hell i couldnt even read all that! why havent u put on the sway bars????

please remove those yellow windshield visors. :( just my opinion.

im keeping mine simple, all thats left to do is install exhaust and new suspension. i'll probly find some other stupid thing to do like security/keyless entry.

just a little bit of boost, then as stuff breaks when the motor blows ill upgrade as it happens :o then a little more boost, this will be in the next couple months more than likely


thats all :)

I am undecided wether to keep my 1.3 or change to a DOHC ZC next year, but I am lowering mine 40mm with 17" whatever i do and tinting the windowsnext, I want to get a WW kit eventually on one of the civics and then that will be it i think

Not crash it:)

But seriously, I would like to find a new car, something stick and 2dr just so much more potential, but keeping it in the honda family

Originally posted by mellowboy


Yeh hes gettin rid of it. Right now hes over hauling all the stuff to his new rex:)
Damn - i cant believe i missed this post lol. Yeh, We just swapped the b16 into my 90 CRX Si (got for $200 w/ near mint black body), transferred my 89 interior (some of it) into the 90....and we're in the process of transferring the suspension on the passenger side over :D The goal is to have the bitch movin by this weekend. Oh yah, and we installed the JDM CR-X SiR rear spoiler...and we're installing my 95 gsr cluster too. :D man im excited....no more mother fucken piece of shit bumblebee...man and the thing had such a reputation in my town too....ah well hehe. Will try to get some pics asap. :cool:
PS- thanx for the compliment melt..hehe. hope ya like the new one better :)

oh yah....i forgot - i really should get a pic of the bumblebee up on 64 bricks in the front of my house w/ no engine, interior, or wheels. as if it was enough of an eyesore before... :rolleyes: :hehe:

Originally posted by el_loco_civic


What wings you think would look better on a Sedan 91 ?:confused:? Not gonna be for racing or to help ground me or anything, just for the looks. Both are Universal. I know its up to what i like, but i wanted to know if any one of these look just like crap on a sedan. Thanks - sorry to post whore this, but its deciding my future plans right ? ;)

Snyper : http://files.automotiveforums.com/uploads/791104cc_sniper.jpg

Saleen : http://files.automotiveforums.com/uploads/287891SaleenWing.jpg

thanks again -!

if i were u i would go with the sniper, that would look good with the kit you described. also how much is your suicide rear door conversion going to cost you? i was wondering about doing that to my sedan.

MY88 Honda Civic Renaissance Model Xperiment (CRX)





COLOR: deep purple with 5 coats of clear.
____________________________________________
LIGHTS: black light (cockpit, boot, under guards), neon purple (under car), neon red (pod filter), neon blue head lights, clear tail lights.
____________________________________________ENGINE :
Integra K20A
Part No: K20A Type R Engine Package Price: USD $6,500.00
Yr.: 2001 Type R 1998cc,DOHC I-VTEC. 16V. 6 Speed M/T, Horsepower :220hp@8,000rpm, Torque: 21.0kgm@7,000rpm, Compression: 11.5:1, FWD, Engine, Tranny, ECU, Wiring Harness.
Disp: Stock Qty: 6
2.0 Note: tax, shipping and handling may apply.
Made in Japan


____________________________________________
INTERNALS: Mugen 8:1 Compression Pistons, Mugen Cams adjustable cam sprockets, computer adjustable timing.
____________________________________________TURBO: twin Garrett GT20 roller- bearing turbo.
____________________________________________
TURBO GEAR: HKS twin boost controller, HKS
Turbo timer.
____________________________________________
BOOST: 21psi Max Boost Pressure.
____________________________________________
COMPUTER: Microtech MT8 Engine Management System.
____________________________________________
NITROUS OXIDE:Pro Shot Fogger 2TM Nitrous Systems
150-500+ HP ADJUSTABLE
500 HP adder FWD kit, quad 3 lb bottles, bottle warmers.
____________________________________________EXHAUS T: Trust BL MX Exhaust System 3.5-Inch Mandrel- Bent System With 12-In Hotdog With twin Stainless 7-Inch Tips.
____________________________________________
INTAKE: OBX racing filter (ram pod).
____________________________________________
INJECTION: 65 mm throttle body with 3/4 in jets 8x Toyota 4AGZE spark plugs.
____________________________________________
BRAKES: 9 in RX-7 disc all-round, Endless Pads.
____________________________________________
COOLING: twin 12 in thermos, four core R34 Nissan skyline GTR V- SPEC 700x300mm front mount intercooler with neon purple hose.
____________________________________________
GEAR BOX: worked CRX 5 speed.
____________________________________________
CLUTCH: RPM triple plate clutch kit with stiffer springs and stiffer presser plate.
____________________________________________DIFF: worked CRX with 4:11 ratio.
____________________________________________SUSPEN TION: Kings 1.5 Inch Lowered Springs.
____________________________________________SEATS: OBX Monaco Racing Seats With 2.5-In 4- Point Safety Harness.
____________________________________________
GUAGES: speco (boost, NOS, air/fuel mix) RPM Billet Alloy tacho Shift Light.
____________________________________________STERIO : clarion VRX925VD DVD player and screen, Sony playstation 2 on dash, Rockford forgave fanatic front (2x4 in 2x6.5 in splits) rear 6x9 in, 2x Rockford fosgate power HX2 10 in subs Rockford fosgate subs in a custom made box (2x1500bd amps) front (400S amp) rear (700X amp).
____________________________________________
BODY KIT: OBX strut brace front and rear, Tsunami racing kit and with a front spoiler.
____________________________________________
RIMS: 20x8 in FD twirls.
____________________________________________
RUBBER: 235/35ZR/20 toyo.
____________________________________________
PROFORMANCE: 11.403@145 MPH
0-100 in 4.6 sec
350 hp @ 21 psi at the fly wheel (no nos)
750 hp @21psi at the fly wheel (with nos).

I plann on:painting my bodykit,installing my overbored thottle body,get an intake,and coil overs.

Originally posted by Stali08
Not crash it:)

FUNNY:rolleyes:

no, i have calmed down MAJORLY since the crash now, everytime i see my sig i think HOW THE FUCK DID I GET OUT OF THAT ?

See below for my plans.....:smoker2:

cutting and welding air ride brackets to make it sit even lower

new rims hopefully

new front body kit

redoing the entire interior

carbon hood

eventually shave handles, squirters, antenna, tail lights

I have a lot of work I need to do on my civic. I just finished strippin out the back half of the car and the carpet. I put the hx rims on last weekend, I got my tenzo front and rear upper strut tower bars on, i finally put the front end back together. Now for my plans..
-well first I need to throw the a6 in there
-put the short shifter in
-put my sofsports on and get new struts and new bushings
-get some new tires
-tint the windows
-paint it
-either get teg rear disks or just replace all the stock brakes.
-put my tenzo rear section on with custom 2.25 inch pipes
-get an hp header
-I was gonna build up the a6 but I am now just looking for a z6 or y8 to build up.
Sorry for the long list and I will try and get some pics up. It's just hard because I am stil at school mostly, but I have my last final tomorrow so it'll be soon.