Cap and Rotor 96 1500
nbubak
05-30-2010, 10:09 AM
my truck wont start, checked for spark and Im not getting any. goin to replace cap and rotor. Ive never done this before just wondering if you guys have any tips to help me?
thanx
thanx
rhandwor
05-30-2010, 10:18 AM
Buy quality parts,mark the wires start at No.1 and transfer one at a time.
Use a screwdriver and push down and turn for the lugs. Make sure all four are set properly.
Use a screwdriver and push down and turn for the lugs. Make sure all four are set properly.
MT-2500
05-30-2010, 10:18 AM
my truck wont start, checked for spark and Im not getting any. goin to replace cap and rotor. Ive never done this before just wondering if you guys have any tips to help me?
thanx
Use Ac-Delco parts.
Watch where plug wires go and put them back right.
And be careful with screw ears on dist housing.
For no spark check for spark out of coil first.
If no spark there cap and rotor is not going to fix problem.
thanx
Use Ac-Delco parts.
Watch where plug wires go and put them back right.
And be careful with screw ears on dist housing.
For no spark check for spark out of coil first.
If no spark there cap and rotor is not going to fix problem.
nbubak
05-30-2010, 12:34 PM
how do i check spark out of the coil?
rhandwor
05-30-2010, 07:14 PM
MT-2500
05-31-2010, 10:36 AM
how do i check spark out of the coil?
Stick a spark tester in the end of coil and crank engine and watch for good hot blue spark jump.
Stick a spark tester in the end of coil and crank engine and watch for good hot blue spark jump.
Elbert
05-31-2010, 01:44 PM
New cap and rotor would be good to do anyway. But coil and potentailly the module are probally the issue. I think those distributors still have a "module"...?
Automotive Network, Inc., Copyright ©2025