hot four killer

99 mustang modified better than any hot fours:finger:
http://files.automotiveforums.com/uploads/300228japkiller.jpg
http://files.automotiveforums.com/uploads/408461japkiller2.jpg
http://files.automotiveforums.com/uploads/487661japkiller3.jpg

somebody just beat shorty at ricing J/K

i like mustangs but this is a horrible thing you did to it.

ok here we go

-sxe hood, nice paint job on it
- sits way to high
-wing is very bulky and doesnt sit rite
-front bumper lip shuldnt be there
-need more realistic rims
-do somthing with the headlights

IMO the spoiler and the rims does not suit it, the lower part of the front bumper looks odd too.

Is it just me, or are those side view mirrors upside down and flipped left and right? :bloated:

Originally posted by TheSyndicate
Is it just me, or are those side view mirrors upside down and flipped left and right? :bloated:

I feel the same way too.
Correct me if I am wrong but it looks kinda funny, no offense.

i like the car!
it looks like everebody here on AF car modeling, hates ricers.....

Neat work!

Hey, nice work oldboy, the 'stang looks hot.. :devil: :devil:

Also welcome..

:wave:

Nice to see another aussie onboard..;)

cheers stump

That's hot!:cool:

I like it. Except those rims... But other than that, great job!

The poor old fella is actually a mainlander from NZ. You've got to forgive him if he makes mistakes I mean look who his rolemodel is - Phase V - the poor fella is literally tearing his hair out trying to find inspiration(Sorry old fella - couldn't resist. Hope you are well)

Welcome along to AF.
Something different for a change but really needs to loose them wheels.

I see a '99 Mustang with a Detail Master pre-wired distributor and coil, Mistsubishi Lancer Evo wing, and wheels from some lowrider company.

Quite a mismatch, and I don't think it's a very aesthetically pleasing one, either. Sorry. :(

The wheels and the odd rake of the wing are the major offenders, here.

nice engine but IMO it needs to be lowered and the vielside rims dont suite the car

the dizzy is from the kit,coil is alumium tube,rims 18 inch fujumi(to big for a lowrider,you were correct about the wing though,1out of 4 not bad:flipa:

Looks alright. Those are Veilside rims aren't they? The idea isn't too hot but the execution is very well done. Looks clean and the paint looks shiny. Keep up the good work :)

I like the engine alot but with that kinda engine you need to put some slicks on the back, and ditch the spoiler. I like the car alot, but them rims, idk. Just my opinion.

Well done job but...I don't really like those wing on the Mustang. Look wired. Juz my 2 SG cents. :rolleyes:

Originally posted by daggerlee
Looks alright. Those are Veilside rims aren't they? The idea isn't too hot but the execution is very well done. Looks clean and the paint looks shiny. Keep up the good work :)
same here:)

Am I the only one who does'nt have any complanits about the car? I love every part of it, it's crazy. It's original and nice, I don't see anything bad about it, and I AM anti-ricer :p

Great work man, welocme to AF, whats next?

veilside rims on the stang :lol2:

Originally posted by integra818
Am I the only one who does'nt have any complanits about the car? I love every part of it, it's crazy. It's original and nice, I don't see anything bad about it, and I AM anti-ricer :p

Great work man, welocme to AF, whats next?

Agreed, because it's different, I think it's DOOOOPE...good work man!

Nice colour and nice model and after all its yours and you must like it, keep em coming its good to get creative from time to time :)

theoldboy, how did you get that color on the hood? I want to paint one of my cars the same shade but i can't figure it out, is it normal paint or was it a special mixture???

:)

Creative. Not my kind of mustang though.

Welcome! Nice work, they style doesn't work for me, to each his own! :)

Nice shine, and I like the color on the hood... :) Welcome to AF! :wave:

One note, were there two different "HISSSSS" plates? The one you have on the front has registration tags (stickers in the top corners). If there's one with, and one without, the reg tags go in the back. Unless, of course the kit only came with one type, then it's not your fault... :o

Originally posted by jay@af
Nice shine, and I like the color on the hood... :) Welcome to AF! :wave:

One note, were there two different "HISSSSS" plates? The one you have on the front has registration tags (stickers in the top corners). If there's one with, and one without, the reg tags go in the back. Unless, of course the kit only came with one type, then it's not your fault... :o
The kit includes for both front and back(one with tags, one without. Nice observation Jay, he does have the "wrong" plate in the front, I wouldn't have noticed unless you pointed it out.

Original, yet not my style, but I can appreciate the fact on how much work was put into it!

I was trying to fit some 18" Fujimi wheels one mine, but parts of the interior bay is pushing the wheels "foward" and makes it uneven in the fender. Did you have the same problem? If you don't understand what I'm saying, I can post a few pics.

Originally posted by Honoturtle
The kit includes for both front and back(one with tags, one without. Nice observation Jay, he does have the "wrong" plate in the front, I wouldn't have noticed unless you pointed it out.Yeah, I don't mean to nit-pick; just pointing it out since I bet most people in NZ haven't seen many California license plates. :) (At least not as many as me! ;))

Not sure if the style is for me, but hell we build models for ourselves right :)

Originally posted by jay@af
Yeah, I don't mean to nit-pick; just pointing it out since I bet most people in NZ haven't seen many California license plates. :) (At least not as many as me! ;))
Whoops, I just looked at my decals now and they have the registration tags on both plates :confused: This is the first time I saw a Revell car with registration tags for both the front and rear licence plates. I just don't get it................ bad designer? But the Washington state plate only has the tags on one................. strange.

Anyways, my question now is why they don't make Hawaii plates?

Okay let me add some light on this mustang theoldfella was building a mustang that say was sold in japan maybe or done up by someone thats into tuners. Thats the idea with the rims and the spoilers, i'm mainly to blame for the rims as there was soo many we tried and trust me these were prob the best. he had a decent rear wing for it but i stole it of him:finger:
and gave him that one the ride height well you should have seen it before hand (anyone for four wheel drive) it's as low as it can go.
the bonnet is gloss black paint with bronze automotive pearl mixed in, the idea was to give like a carbon fibre look. the dizzy was hand made.
Well i just learn't about number plates as in Australia our plates are the same front and back. Don't know about California just that the take the fun out of cars and bike with polution laws;)

very nice i like the front looks like the 60's stangs, but i think some 5spokes would look alot better than the veilside's!

Originally posted by TheSyndicate
Is it just me, or are those side view mirrors upside down and flipped left and right? :bloated:

Thae mirrors are actually in the correct way.Cannot go in any other way

how about a cyber drag oldboy!!!! LOL :bandit:

Originally posted by ef302
how about a cyber drag oldboy!!!! LOL :bandit:

anytime paul but you better paint it red so you can keep up
cheers mate

ready to pick your doors up cause this baby's gunna blow them OFF!!!! LOL :badass:

I don't think the mustang looks very nice when trying to make it look like an overkill import. The engine looks good and the build looks like you didi a quality job it just really is not my taste.

I like it ! Sweet, and the engine is doing it !