b16 swap question
outofstep
05-03-2003, 02:24 AM
im talking to this guy about buying this motor:
Complete Engine
5 Speed Standard Transmission
ECU (Computer)
Clutch
Flywheel
Intermidiate Shaft
Wiring Harness
Starter
Alternator
All Manifolds
-------------------------------
Specs on this engine:
Miles: 32000
Years: 1989-1991
Chassis: DA6/EF9
Engine: 4 Cylinder 16 Valves
Transmission: Cable M/T (5 Spd)
Displacement: 1595cc
Horsepower: 160hp@7600 RPM
Torque: 111lb-ft@7000 RPM
Redline: 8200 RPM
Compression Ratio: 10.2:1
Computer OBD1 PR3
Fuel Recommendation: 92 Octane or Higher
Average Compression: 150-170 PSI
what else will i need for this swap, i have a 90 civic HB, im guessing axles and mounts? anytihng else?
Complete Engine
5 Speed Standard Transmission
ECU (Computer)
Clutch
Flywheel
Intermidiate Shaft
Wiring Harness
Starter
Alternator
All Manifolds
-------------------------------
Specs on this engine:
Miles: 32000
Years: 1989-1991
Chassis: DA6/EF9
Engine: 4 Cylinder 16 Valves
Transmission: Cable M/T (5 Spd)
Displacement: 1595cc
Horsepower: 160hp@7600 RPM
Torque: 111lb-ft@7000 RPM
Redline: 8200 RPM
Compression Ratio: 10.2:1
Computer OBD1 PR3
Fuel Recommendation: 92 Octane or Higher
Average Compression: 150-170 PSI
what else will i need for this swap, i have a 90 civic HB, im guessing axles and mounts? anytihng else?
mellowboy
05-03-2003, 05:09 AM
90-93 integra axles
hasport or HCP mounts
Hasport or HCP shift linkage
www.hasport.com , www.hcpengineering.com
By the way its not obd1 its non obd:)
hasport or HCP mounts
Hasport or HCP shift linkage
www.hasport.com , www.hcpengineering.com
By the way its not obd1 its non obd:)
mellowboy
05-03-2003, 05:10 AM
What model hatch do u have?
outofstep
05-03-2003, 12:48 PM
its a DX. im still kinda wondering if this is a legit offer, cause the dude is like send 700 cash and its yours , if i pay money order he wants 850...
so how much you think i can get the rest of that for?
so how much you think i can get the rest of that for?
91civichatch2571
05-03-2003, 12:54 PM
it honestly does sound a lil shady in my opinion if hes saying send cash and its extra for MO.
kris
05-03-2003, 01:00 PM
Originally posted by outofstep
its a DX. im still kinda wondering if this is a legit offer, cause the dude is like send 700 cash and its yours , if i pay money order he wants 850...
so how much you think i can get the rest of that for?
Is it a reputable seller?
Usually the whole swap, engine/ecu/trans runs more towards $1000-$1300.
its a DX. im still kinda wondering if this is a legit offer, cause the dude is like send 700 cash and its yours , if i pay money order he wants 850...
so how much you think i can get the rest of that for?
Is it a reputable seller?
Usually the whole swap, engine/ecu/trans runs more towards $1000-$1300.
mellowboy
05-03-2003, 04:05 PM
Fuck him. Send him MO its safer. I would NEVER send cash. Think about it..hes chargin u an extra 150 cause of MO? That dont make any sense at all.
outofstep
05-04-2003, 07:53 PM
well im really thinking its a shady deal now cause i tried to get his # and all and he hasnt replied in a long time....
so back to the drawing board. so i have a DX, looking for ZC or b16 complete swap.
so back to the drawing board. so i have a DX, looking for ZC or b16 complete swap.
1.5 liter
05-04-2003, 08:14 PM
go 2 hmotorsonline (www.hmotorsonline.com)
kris
05-05-2003, 12:15 PM
or www.nippon-motors.com
sciamop
05-05-2003, 12:32 PM
go with Hmotors; I just got a replacement 3SFE (toyota) from nippon-motors. The TPS, ISC and the distributor cap were smashed... not really a big deal because I have spares from the old motor (not the case w/ a hybrid). The hmotors b16 had NO broken sensors...
FYI, the MOST important thing when purchasing an engine is the vendor's reputation/guarantee.
Todd
B16A Si
FYI, the MOST important thing when purchasing an engine is the vendor's reputation/guarantee.
Todd
B16A Si
WhiteFox_c
05-05-2003, 04:15 PM
i bet you 50 to 1 that its a stolen motor
outofstep
05-06-2003, 04:59 PM
im really in debate with which to go with, i mean looks like i can get the ZC 600-700 and it should bolt right in
or i got the b16 1100-1200 , then i have to get the mounts and linkage makes what another 400.
im just really wondering how much diffrence is there, or i guess i mean is the extra 700 worth spending, is it that much better? i have not driven either of these motors so i really dont know which to get. i wanna have the least amount of problems, yet i want it to be fast, fast and reliable is my goal.
or i got the b16 1100-1200 , then i have to get the mounts and linkage makes what another 400.
im just really wondering how much diffrence is there, or i guess i mean is the extra 700 worth spending, is it that much better? i have not driven either of these motors so i really dont know which to get. i wanna have the least amount of problems, yet i want it to be fast, fast and reliable is my goal.
Automotive Network, Inc., Copyright ©2025