update from the shop

heres a few shots of my prelude tail conversion. its coming along, but theres a lot left to finish

http://www.sportsnimports.com/galleries/data/510/19rear2.jpg

http://www.sportsnimports.com/galleries/data/510/19rear1.jpg


heres a shot of the roof, without rain gutters or an antenna, see my SiR spoiler!!


http://www.sportsnimports.com/galleries/data/510/19roof.jpg

i went ahead and molded the bumper into the fender, cause the bumper had a chunk missing from one side, and i think that molded looks cleaner. hopefully i dont ever have to take the bumper off

http://www.sportsnimports.com/galleries/data/510/19shaved1.jpg

http://www.sportsnimports.com/galleries/data/510/19shaved2.jpg

ill post more as they come. should be primering it this weekend

hey whats up with your corner lights, are those black corner enses? no way i want those so bad, do tell where u got i have same projectors as you and it will look so much better with those

you are gonna have to make your own, or put CRX fenders on your car, like it did. cause ive never seen black corners made for the hatch.

I just found these on ebay jdm black corners for a HB.
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2413143644&category=33708

Originally posted by DArkforces9
I just found these on ebay jdm black corners for a HB.
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2413143644&category=33708

i bought a set of those already. they are actually for the 4 door. try as i might, they wont fit on the hatch, no matter what people say. want a set?

they're for the 4 door? still have em??? :)

Originally posted by Jay eS Iye
they're for the 4 door? still have em??? :)

sure do. send me 30 bucks and they are yours

Originally posted by DArkforces9
I just found these on ebay jdm black corners for a HB.
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2413143644&category=33708

JDM black corners huh? LOL

I guess everything is JDM. :rolleyes: :D

i already made my own they dont come out good enough though i wanted the front to be clear so it matched better

look at mine, the front is clear on them, no texture at all

VERY nice job Incucivic. This summer i'll be getting my Body kit for my sedan. And im also planning on molding all of it on to my car for that smoother look. The back of my car will look a lil more round than i thought it would, finishing my prelude lights, i have to cut off the corner, and round it down. But i think that will make it More Euro and cleaner/sleek look. So thats cool. And molding whole kit to car, and fillin cracks will make it look better IMO and thats my plans. And im thinking bout getting my stock bumper, adding on to that, so that it goes down, smooth, and more round, cuz the countour shape of back where Lude lights will be, will round it out, so i dont want a boxy bumper like Xtreme. So, i'll make a more rounded, sleek, shape to match contour. then to finish rear, i need to find or make rear wingz to match. thats bout it. My Headlights are started. (Accord 1pc JDM'z) and im hopefully getting that done this weekend.
*sorry for all this post whoring* but u got some good ideaz tha im uzin too, jus thot it was necessary. But yer car iz coming along great. Like them cornerz w/black housin headz & carbon F. Hood. Flowz good. Keep it up as well az yer pix !

herez jus an idea of what iz goin on w/my sedan. And how im doin it. I been switchin off w/head lights, and tail lights off and on. i need to stick to one thing. But here u go ~*

this sucks. im doing a flippin taillight conversion along with hella body mods, and hardly anyone replies. but then melt gets a friggen header for his DPFI motor and more people reply to that (no offense to you melt). i know its not cause i dont post pictures, cause i got a buttload of them. not as much as melt usually has though.....

lookin good m8, keep up the good work;)

whats the final color of your car going to be ? ( when i got body done, the whole kit on, im going w/ a type of candy apple red w/ tri coat metallic finish )

yeah looks good man looks good. i cant wait to see it when its finished

Originally posted by el_loco_civic
whats the final color of your car going to be ? ( when i got body done, the whole kit on, im going w/ a type of candy apple red w/ tri coat metallic finish )

its gonna be championship white. and thanks to all the people who care, it keeps me workin on it

Originally posted by incucivic


its gonna be championship white.
Sounds good. So you just finishing up molding and primering, then your doing paint ? or no ?

yeah i gotta mold the back bumper in, mold the taillights, finish cleaning up a few dings, and mount and mold the sideskirts. then its gonna be primered. i think itll be primered by the end of this weekend

well cool deal Homez, keep up that good work, and keep us posted on any mods u make. Sure its gonna come out good.

Championship white is the ultimate color, you car is going to look sweet when its done. :D !!! How did you get the CRX fenders to fit do they just bolt up?

Originally posted by AlwaysMovin
Championship white is the ultimate color, you car is going to look sweet when its done. :D !!! How did you get the CRX fenders to fit do they just bolt up?

all the bolt holes line up fine. the only downside is that you need to use the fender to headlight to bumper bracket from a CRX, which meant i hadda go to the junkyard. and then theres the big open spot between the wheelwell and the door, cause the CRX comes with that small sideskirt on it stock. but my body kit covers it. if you guys want, i can take a picture of the fender before i mold the sideskirt in

herez jus an idea of what iz goin on w/my sedan. And how im doin it. I been switchin off w/head lights, and tail lights off and on. i need to stick to one thing. But here u go ~*


how are things with the car? do ya have any new pictures? web site link?

JDM black corners huh? LOL

I guess everything is JDM. :rolleyes: :D

No doubt.. I was going to say that.. Like the "JDM" amber corners..

how are things with the car? do ya have any new pictures? web site link?

hey guys, hows everyone doing ?? Well 4thGen, Things with my car are pretty much the same, i been busy with school, job, payin off my other car at the same time.. and just broke up with girl friend :cwm27: But, school's going good, and im selling my car to a friend now ( del sol 93 no mods ) and im not tied to a girl :smokin:

And back to work now, and alot of my money is going into my car now, im getting a hook up with a B18c1, and im still deciding if i want to try modding a 92-95 civic front bumper instead of the 90-91 Xtreme front bumper.(by the way, is there any new sedan rear bumpers out i might have missed ?? ) But by December, it'll be done positively !!
--Which includes :

Body Kit - Wings - Rims (still deciding which ones ) - Completed head/tail light Conversions - molded kit to car - and paint job !!

( and lil' things like tinted windows, interior lights, and possibly if i pick up a job at the movie theatres, i can get an air system i been waitin for :naughty: ) i wont start engine mods until everything else is done, but im thinking about holding off on the swap until i do add the add ons.. i dont want to put it in, then take it back out :disappoin

OH YEAH ! i got pix from Atlanta's NOPI show. I need to develop still and scan to post up.. some good crx, 2 sedan i think.. and hatch backs of course :p bad thing is film was black and white.. friend just told me to take pix w/his cam.. but the GOOD THING IS ! ... i got a couple pix with me and some FINE models !! :evillol:

Soon as i get pix, i'll post, and soon as i make progress on car, i'll do the same :smile:

and INCUCIVIC - any new progress on your ride yo ?

im glad you mentioned it. the front and sides are complete, and im probably gonna weld the taillight buckets in soon. the engine is in, and most of the engine bay setup is finished.

things have been hectic with me too. i got my own house, moved outta my parents, and am still working on bringing all my cars and parts to the new house. november will be the month to watch, im doing work on the car every afternoon until its finished.

nice.....so when do u think u'll be finished?

this sucks. im doing a flippin taillight conversion along with hella body mods, and hardly anyone replies. but then melt gets a friggen header for his DPFI motor and more people reply to that (no offense to you melt). i know its not cause i dont post pictures, cause i got a buttload of them. not as much as melt usually has though.....


http://www.automotiveforums.com/kris/kris/+junk/BAND_AID.gif

Pretty cool you like to do all that work. Myself, I went through the kit phase, and now I just like clean, stock looking civics. :)

well mines clean, but not stock looking. i focused on the things i disliked about the hatch, mainly the filler pieces and moldings, i never liked all that stuff because it made the car lose its flow. so i shaved most of it off, and covered it up with something better looking where i could.

ive got enough stock looking civics, i needed a special one.

i appreciate all the concern, it gives me the drive to get back there and work on it some more.

nice.....so when do u think u'll be finished?

i plan on having the majority of the work done by the end of november, barring anymore setbacks like renovating and moving into my house. then once its painted ill get around to changing out the windshield and installing my Ninterior

well i got some good news for you, i might be able to help you out a bit, i am now employed and if you still have that headlight + assembly + corner light i will be able to give you a small income boost in exchange for them as soon as my paycheck comes in.

JDM black corners huh? LOL

I guess everything is JDM. :rolleyes: :D



I agreeeeeeeeeeeeeeeee with you what up with JDM;;;;;;;everything is JDM this days..................

I use JDM motor oil, radiator coolant, windshield wiper fluid, and gasoline, it really makes a difference...