LEXUS LS600HL 1/24 Fujimi

Hi all!
It is my the first VIP here, I hope not last.
http://photofile.ru/photo/namych/95197234/large/101342183.jpg
kit included PE
http://photofile.ru/photo/namych/95197234/large/101342202.jpg

Has begun this model for a long time, already in September 2008года, then there was a big break-was gone inspiration... Has now returned to a hobby:smile:
Here that is made then and now
http://photofile.ru/photo/namych/95197234/large/101342187.jpg
Cut out pockets in the doorway
http://photofile.ru/photo/namych/95197234/large/101342173.jpg
Has pasted panels of window regulators
http://photofile.ru/photo/namych/95197234/large/101342180.jpg
The panel on real cars is drowned in an upholstery, therefore has been decided to do so
http://namych.users.photofile.ru/photo/namych/95197234/xlarge/116127875.jpg
On this model has decided to try to detail as much as possible an interior-will to use the technics of work new to me with epoxy putty
http://namych.users.photofile.ru/photo/namych/95197234/xlarge/116127887.jpg
HAs made a ceiling
http://namych.users.photofile.ru/photo/namych/95197234/xlarge/115801638.jpg
http://namych.users.photofile.ru/photo/namych/95197234/xlarge/115801642.jpg
http://namych.users.photofile.ru/photo/namych/95197234/xlarge/115801659.jpg
Lobbies and rear quarter pillars
http://namych.users.photofile.ru/photo/namych/95197234/xlarge/116060301.jpg
http://namych.users.photofile.ru/photo/namych/95197234/xlarge/116060260.jpg
to be continued :smile:

nice work so far, can't wait to see more!

nice work on the ceilling & interior :smile:

nice work on the ceilling & interior
:iagree:

looks good so far, just one question. on that roof, how do you take it off the tape w/out breaking the putty??

Agree with the comments about the headlining - that's a very neat technique!

Nice job so far with the interior. What color combo are you going for?

It is not assured that has correctly understood questions (my English bad, it it is necessary to use the electronic dictionary), but I will answer:
looks good so far, just one question. on that roof, how do you take it off the tape w/out breaking the putty??
Putty very plastic even when completely will dry up. I have noticed that under warm water it becomes even more pliable. Despite it I did all very cautiously

Nice job so far with the interior. What color combo are you going for?
I think that the salon will be beige, about an exterrier has not solved

And little update

I have decided to do medium upholstery of two parts
Top
http://namych.users.photofile.ru/photo/namych/95197234/large/116291043.jpg

http://namych.users.photofile.ru/photo/namych/95197234/large/116291030.jpg
and bottom
http://namych.users.photofile.ru/photo/namych/95197234/large/116291027.jpg
Has drilled apertures both has inserted pins and were then joined the top and bottom part
http://namych.users.photofile.ru/photo/namych/95197234/large/116291047.jpg

http://namych.users.photofile.ru/photo/namych/95197234/large/116291049.jpg

http://namych.users.photofile.ru/photo/namych/95197234/large/116291113.jpg

http://namych.users.photofile.ru/photo/namych/95197234/large/116291114.jpg
Almost ready medium upholstery :smokin:
http://namych.users.photofile.ru/photo/namych/95197234/large/116291797.jpg

This is amazing! I have wanted to use this exact technique for quite some time, just been to busy with my real car to build models.

Hi all!
Little update

Front seats slightly modified
http://namych.users.photofile.ru/photo/namych/95197234/xlarge/117636378.jpg

Made console of lights and DVDs. ceiling was primed to see the inaccuracies
http://namych.users.photofile.ru/photo/namych/95197234/xlarge/117636379.jpg

And glued PEhttp://namych.users.photofile.ru/photo/namych/95197234/xlarge/117636384.jpg

Very nice job you did there! Keep up the good work :)

Very nice work so far! Can't wait to see more.

Terrific! Somehow you should show all the details after finishing it as you put a lot of work in the details!

:eek2:Amazing job man!

The cieling looks amazing, Keep at it!

bro, that headliner is a masterpiece on it's own... keep up the great work.

Thanks all.
Upgrade front bumper's parktronic
http://namych.users.photofile.ru/photo/namych/95197234/large/117668856.jpg

http://namych.users.photofile.ru/photo/namych/95197234/large/117668935.jpg

http://namych.users.photofile.ru/photo/namych/95197234/large/117668937.jpg

http://namych.users.photofile.ru/photo/namych/95197234/large/117668936.jpg

:eek2:

To be honnest, I'm not very found of VIP limos but the detailing work you did on this one is just amazing.

Keep it going ;)

And it is a little more about a ceiling :)
Made sun vizors and assist grips
http://namych.users.photofile.ru/photo/namych/95197234/large/117941744.jpg

made deepenings for assist grip
http://namych.users.photofile.ru/photo/namych/95197234/large/117941745.jpg

http://namych.users.photofile.ru/photo/namych/95197234/large/117941746.jpg

http://namych.users.photofile.ru/photo/namych/95197234/large/117941747.jpg

Woooooooooooooooow!

the entire scratch built ceiling is fantastic work, the best i've ever seen :thumbsup:

Very impressive work.

Very neat method for the parking sensors, and that headliner looks amazing!

I am speechless. You are like Jaykay of street cars:) I'll be following this thread closely

I hope that you didn't forget the springs from the handles. It's a shame if they aren't working. :D Nice work :)

That's awesome!

I hope that you didn't forget the springs from the handles. It's a shame if they aren't working. :D Nice work :)
You will not believe, but here http://forum.autoinscale.com/viewtopic.php?pid=137339#p137339 (post 51) i was asked the same question :biggrin:.

Thanks all :)

wow!! excellent work man!

Please keep posting the news!

"Magnificent work!!!!!"

Great work !!
Rare to see someone paying attention to ceiling...

Hi all! Thanks all for comments

Small update. Upgraded rear headrests
http://namych.users.photofile.ru/photo/namych/95197234/xlarge/120047377.jpg
http://namych.users.photofile.ru/photo/namych/95197234/xlarge/120047378.jpg
http://namych.users.photofile.ru/photo/namych/95197234/xlarge/120047379.jpg
http://namych.users.photofile.ru/photo/namych/95197234/xlarge/120047380.jpg
http://namych.users.photofile.ru/photo/namych/95197234/xlarge/120047381.jpg
http://namych.users.photofile.ru/photo/namych/95197234/xlarge/120047382.jpg
http://namych.users.photofile.ru/photo/namych/95197234/xlarge/120047981.jpg
http://namych.users.photofile.ru/photo/namych/95197234/xlarge/120047383.jpg

completed the first phase with the salon-cutting, modeling, upgrading :smile:, primed and ready for painting
http://namych.users.photofile.ru/photo/namych/95197234/xlarge/120091161.jpg
http://namych.users.photofile.ru/photo/namych/95197234/xlarge/120091162.jpg
http://namych.users.photofile.ru/photo/namych/95197234/xlarge/120091164.jpg
http://namych.users.photofile.ru/photo/namych/95197234/xlarge/120091165.jpg
http://namych.users.photofile.ru/photo/namych/95197234/xlarge/120091168.jpg
http://namych.users.photofile.ru/photo/namych/95197234/xlarge/120091193.jpg
if you have any questions, I'll try to answer them

Wow!!! Very nice interior work. :iceslolan:iceslolan

Best interior ever!!! i was missing updates :)

The interior is looking flawless!! May i ask what size of wire did you use on the headrests?

Keep up the fantastic work! Lack of interior pillars and headliners are still a real weakness of kits.

The interior is looking flawless!! May i ask what size of wire did you use on the headrests?
This is a needle from a medical syringe, approximately 0.6 mm

the interior is super nice! i have no idea which part had been modified, everything is perfect, but i know the original interior is definitely not so detail :rofl:

I have a litte question...

Do you use a magnifying glass or something like that becease what you make is GREAT:eek7: I am in shock over here!

I have a litte question...

Do you use a magnifying glass or something like that becease what you make is GREAT:eek7: I am in shock over here!
No, I do not use, but sometimes I lack it

No, I do not use, but sometimes I lack it

Damn that is really nice... I have a lot to learn:iceslolan