I need a motor mount
G20t Driver
10-30-2001, 02:25 PM
The front motor mount (the expensive liquid filled one) on my p10 is going out or is already out. I have been trying to find a replacement but can only find one at the stealership for $160 or so. Do any of you know where to get one for less? SE-R.net has them listed for $56 but I do not know who to contact. Any info would be helpful.
P.s. Could driving with a bad mount cause any other damage to the car?
P.s. Could driving with a bad mount cause any other damage to the car?
GoodJuan
10-31-2001, 12:53 PM
www.jimwolftechnology.com just came out with some motor mounts...
GoodJuan
10-31-2001, 12:55 PM
http://www.jimwolftechnology.com/sr20motor.htm
the website said it was for the se-r family of vehicles....hopefully that includes the g20 give 'em a call, though it might take awhile because most of their sales staff are at SEMA
the website said it was for the se-r family of vehicles....hopefully that includes the g20 give 'em a call, though it might take awhile because most of their sales staff are at SEMA
G20t Driver
10-31-2001, 04:31 PM
Thanks for the info, I'll give them a call. Do you know if running with a bad mount will cause any other damage to the car?
GoodJuan
10-31-2001, 06:29 PM
Originally posted by G20t Driver
Thanks for the info, I'll give them a call. Do you know if running with a bad mount will cause any other damage to the car?
I don't really know man, sorry. Someone here might though.
Thanks for the info, I'll give them a call. Do you know if running with a bad mount will cause any other damage to the car?
I don't really know man, sorry. Someone here might though.
T4 Primera
11-02-2001, 03:48 AM
Originally posted by G20t Driver
Thanks for the info, I'll give them a call. Do you know if running with a bad mount will cause any other damage to the car? If one of the mounts isn't doing it's job then the remaining mounts will have to take up the slack and may get overstressed as well.
An engine is a rather large object to have wobbling excessively so I'd replace it just to prevent any potential stress to drivetrain components and anything attached to the engine/trans like wiring, hoses, pipes etc. Vibration can kill a lot of things given enough time (months/years).
Not urgent but don't forget about it. Nip it in the bud.
Thanks for the info, I'll give them a call. Do you know if running with a bad mount will cause any other damage to the car? If one of the mounts isn't doing it's job then the remaining mounts will have to take up the slack and may get overstressed as well.
An engine is a rather large object to have wobbling excessively so I'd replace it just to prevent any potential stress to drivetrain components and anything attached to the engine/trans like wiring, hoses, pipes etc. Vibration can kill a lot of things given enough time (months/years).
Not urgent but don't forget about it. Nip it in the bud.
AznVirus
11-02-2001, 04:30 AM
how can you tell if you have a bad motor mount? on my brothers 200sx, i feel like a creaking noise coming from under the hood. and sometimes the car jumps when i launch the car pretty fast. do i need a new mount?
T4 Primera
11-02-2001, 05:21 AM
Originally posted by AznVirus
how can you tell if you have a bad motor mount? on my brothers 200sx, i feel like a creaking noise coming from under the hood. and sometimes the car jumps when i launch the car pretty fast. do i need a new mount? Look for torn or separated rubber. Sometimes rubber that has been soaked with oil or solvents will perish. Look for black fluid leaking from the mount.
how can you tell if you have a bad motor mount? on my brothers 200sx, i feel like a creaking noise coming from under the hood. and sometimes the car jumps when i launch the car pretty fast. do i need a new mount? Look for torn or separated rubber. Sometimes rubber that has been soaked with oil or solvents will perish. Look for black fluid leaking from the mount.
P10DET
11-02-2001, 01:50 PM
Infiniti of Scottsdale gives discounts. Call them.
(800) 955-9181
You probably don't wan the JWT mounts, even if they fit. They are solid rubber mounts and your car will vibrate a lot.
(800) 955-9181
You probably don't wan the JWT mounts, even if they fit. They are solid rubber mounts and your car will vibrate a lot.
GtRider
01-02-2002, 02:55 PM
i have a a bad motor mount on my left side of the engine,
my friends say that i should replace all the mount at the same time.
is he rite or wrong?
he says if i put 1 new mount the other mounts will mess up the new mount
my friends say that i should replace all the mount at the same time.
is he rite or wrong?
he says if i put 1 new mount the other mounts will mess up the new mount
T4 Primera
01-02-2002, 07:22 PM
Originally posted by GtRider
i have a a bad motor mount on my left side of the engine,
my friends say that i should replace all the mount at the same time.
is he rite or wrong?
he says if i put 1 new mount the other mounts will mess up the new mount The new mount may get messed up only if one or more of the other mounts are shot. If they are otherwise good, then it should be ok.
i have a a bad motor mount on my left side of the engine,
my friends say that i should replace all the mount at the same time.
is he rite or wrong?
he says if i put 1 new mount the other mounts will mess up the new mount The new mount may get messed up only if one or more of the other mounts are shot. If they are otherwise good, then it should be ok.
Automotive Network, Inc., Copyright ©2026