240SX no oil circulation/ pressure
TimeWasted
03-26-2010, 12:43 PM
I got a 1992 nissan 240sx with the 2.4 SOHC engine.. had to go behind a slack mechanic a re-do his timing job.. when reassembled the car has no oil pressure (warning light on).
Ok so i take off oil pump. fill it with oil. and try again.. still nothing.
Next fill the pump with Vaseline.. still no oil..
Ok so i make sure the oil pump/dist shaft is lined up properly. un plug the coil an spin the motor over a bit.. nothing once more..
o an i tried a brand new oil pump with the same results..
used a air compressor to blow out oil passages..all clear.
pickup tube is not stopped up(removed oil pan and checked)
Can anybody help me out here? ive tried everything i can think of.. Maybe some way of priming the oil pump would help.. thank you--braxton
Ok so i take off oil pump. fill it with oil. and try again.. still nothing.
Next fill the pump with Vaseline.. still no oil..
Ok so i make sure the oil pump/dist shaft is lined up properly. un plug the coil an spin the motor over a bit.. nothing once more..
o an i tried a brand new oil pump with the same results..
used a air compressor to blow out oil passages..all clear.
pickup tube is not stopped up(removed oil pan and checked)
Can anybody help me out here? ive tried everything i can think of.. Maybe some way of priming the oil pump would help.. thank you--braxton
slideways...
04-02-2010, 01:52 AM
after all that work, im assuming you checked the sending unit?
Automotive Network, Inc., Copyright ©2025
