Chipping for a turbo

I am going to be running a t-25 with two side mount eclipse intercoolers. I am going to use 440 cc injectors if I cant get info on chipping the computer to deliver more fuel. If I only run 6psi would it be a must to run the bigger injectors or could I buy a "mugen" chip from ebay. With only 6psi would I have to do anything to the fuel system to be safe? Also I am wondering about how to tap the back of the motor for an oil line.

I would think that your stock fuel system would be enough for 6 PSI. I am not sure about the oil line, you would need a Honda expert for that. You will need to get a piggyback or a standalone computer to drive up the fuel/ait ratio. I suggest that you invest in a fuel/air ratio guage to keep an eye on that as well.

And for 6 PSI, you hardly need two intercoolers, one will do you just fine.

Thanks alot I am going to be building a motor and running more bosst thats why I wanted to go ahead a use two intercoolers. But I think to save a little money early on I will just get one and then get a FMI when I get the motor built.

Originally posted by Santas90Si
Thanks alot I am going to be building a motor and running more bosst thats why I wanted to go ahead a use two intercoolers. But I think to save a little money early on I will just get one and then get a FMI when I get the motor built.

That's a good idea.

Good luck with your project! Sounds like fun! :)