prortiz80

i started on a new project this one im doing for my self so im taking my time with it ....
the box art is great

now all i done so far is sanded the body getting ready for primer.and removing the seams on the body



i want to paint the body mica red...thinking about putting carbon fiber on the hood and trunk....the trunk idea still up in the air

Here's the side view with the rim...not to sure if im going to use these or not but its the one that came in the kit....

Well thats all for now... Please any comments are welcome good or bad

__________________
http://s1.bite-fight.us/c.php?uid=55804 opcorn:

Simas17

Wery nice kit you buyed if you don't mind where you buyed and how much payed?

prortiz80

I bought it on ebay...i think i payed about $21 dollars for it


Well last night while i was working on the model i was looking for some pictures with underbody detail...have found any yet so if anyone got some please Pm me
What i did find is new color choise. now i cant seem to choose which color to paint it
any idea's would help guys....here's what i found last night

__________________
http://s1.bite-fight.us/c.php?uid=55804 opcorn:

jla

found that over on the GTR owners club

prortiz80

Well guys while working on the model i came into a big road block......the suspention on the model is way off rear suspention doesn have one....front suspention is all wrong...so im going to have to use some spare parts from other kits chop it up and make due.....i was thinking of making my own suspention but it wouldnt look right so i'm just going to use some spare parts ........from a old kit and a broken kit just to make it at least look ok

__________________
http://s1.bite-fight.us/c.php?uid=55804 opcorn:

rsxse240

The kit you are building is likely not a GT-R, but a GTS-T with a GT-R body. It still has the RB motor but it's only a 2.5 single turbo and it's only rear wheel drive. The kit you have is not far from the real deal, but aoshima has a tendency to generalize their chassis and make the bodies look good...for the most part. I suggest building this one as a nice shelf model and getting a Tamiya or Fujimi enthusiast if you want a full detail kit with decent accuracy.

In fact, if you are building a drift car, the Tamiya GR.A R32 is already set up with full cage, gutted interior, race suspension and all the stuff you would normally see on a drift car anyway.

__________________
There is a very fine line between "hobby" and "mental illness."

prortiz80

Thank you....for the info but even if its a just shelf kit i got to at least try cause i want to learn ....At least try to come close
which one the Tamiya GR.A R32 im looking threw there catalog and maybe its under diffrent name thank u again

__________________
http://s1.bite-fight.us/c.php?uid=55804 opcorn:

rsxse240

This one:
http://cgi.ebay.com/TAMIYA-1-24-CALS...3286.m20.l1116

__________________
There is a very fine line between "hobby" and "mental illness."

prortiz80

Im back... heres a update on what i have done so far....i been away working on the house rebuilding the bathroom now im finish and got more time for my self. and the model

Here' te suspention the kit offered i was not going to leave it like this i looked threw my spare parts box and found some things to mke it look abit better i couldnt remake te suspention so i did my best....tell me what you guys think and oh the gas tank is from this kit



this is how it came from kit. Found this and some springs and flat tubing

cut it a bit to make it fit





a u can seei added th springs and shock....hand made

at this point i deside to cut off the exhaust pipe and add some down the road

this is the door before i get to it

after

making the doors a race look flat with CF

__________________
http://s1.bite-fight.us/c.php?uid=55804 opcorn:

prortiz80

Sorry for the long wait will post new up date soon

__________________
http://s1.bite-fight.us/c.php?uid=55804 opcorn: