I made a custom hatch cargo cover for my 94 CX. I can make one for you too if you are willing to pay...

mine has 6x9's in it which actually provides a nice bass sound to the car (not like an actual sub of course, but it is not too bad)

it could be just a plain cover too if you did not want the speakers in the cover.

I am glad to see this is still helping people! While I still do not own an accord I do own a 1994 honda civic now (which does not have this issue).

as far as this comment :

"I'm glad to see this last post, as I would advise against tightening the axle nut with an impact wrench. "

It is fine to use the impact gun. Most of the DIY'ers do not have the high dollar impact guns, so the cheaper ones you buy do not have a very high ft lb rating (despite what the package says, lol)

but if you do have a high dollar gun, set it to a lower setting. it is MUCH easier to do this with an impact gun (if you have access) however, it is NOT 100% necessary.

I would however recommend NOT using an impact gun on the bolts you use to press off the rotor.

good luck!

http://img403.imageshack.us/img403/4107/img33493155372.jpg

http://img403.imageshack.us/img403/6092/img33503162813.jpg
http://img256.imageshack.us/img256/6426/img33523178556.jpg