Khkassi

My husband recently replaced the clutch on our 1993 Geo Metro 1.0-liter, 3-cylinder engine. He put everything back together but we have no power whatsoever. No lights, no dash lights, no crank, nothing. He believes some of the wires may be crossed. Any advice or detailed photos of a working 93 engine specifically showing the wiring would be appreciated. I apologize if I'm not more specific but my husband speaks French and I'm trying to translate the technical words to the best of my ability. This is my only car and I really need it back ASAP, thank you for all your help.

RossT

check the fuse box inside the engine compartment. It's on the drivers side infront of the strut tower. Take the black plastic cover off and check the fuses. You more than likely blew the main "bat" fuse.

Do this first.

Johnny Mullet

Also make sure the ground cable was re-installed on the trans.



http://geometroforum.com/topic/638772/

__________________

Khkassi

Great call, you were right on the money, thanks so much, it's up and running.

RossT

Ok who was on the money? Me with the blown fuse, or Johnny with the ground wire??

Khkassi

Sorry I didn't say which one. It was the main "bat" fuse. Changed it and it started right up. Thanks again.

Johnny Mullet

Touche pussycat!

__________________

RossT

Yes we like to slove problems here! Thanks for the update, it really helps others who come to the forum.