sixwongs

Having trouble trying to replace the bulb in the drivers side headlamp assembly.
I unscrewed the top 2 bolts to the assembly, but it seems to be held by the
side lamp can't tell where it's connected? how do you separate the two?
Thank

Classicrocjunkie

pull straights towards yourself. There is a retaining tab holding it in place or separate the lights from side markers by the clip.

__________________
Please don't PM me with your J-body Issues. Post appropriately in the forums,
and I will toss my opinion in your thread if I have anything to help. - Thanks!

2004 Pontiac Sunfire Coupe SE Getrag 5 speed
2009 Subaru Impreza WRX 5-door



www.Rdfabs.com

sixwongs

When you your working from the front of the car.
I can get the left side of the drivers side headlamp assembly loose from the retaining bracket, but the right side seems to be locked together with side marker assembly. There must be a trick to unlocking it from the side markers assembly. I don't see a clip. The side marker assembly doesn't seem to detach easily. The two pieces seem to be pinned together with molded pins on the side marker assembly. When I lift up on the headlamp assembly, I can see the side marker assembly retained by the same type of retainer on the headlamp assembly. The only problem is you can't lift the side assembly up.
I am trying to this as carfully as possible to not break any of the plastic componets.

Thanks